Fans
Fans 6SY7000-0AG81 Industrial Cooling Fan 280mm 230VAC 890W
280 mm industrial cooling fan moves 2565 m³/h at 890 W, 230 VAC, with 30 000-hour L10 life at 40 °C
- High airflow 2565 m3/h for effective cooling
- 890 W input power drives strong performance
- 2740 rpm motor speed ensures rapid air movement
- IP10 protection with galvanized steel construction
- 30000 hours L10 life at 40 °C operating temperature
280 mm 230 VAC industrial cooling fan
This centrifugal fan delivers 2565 m3/h airflow at 2740 rpm from a 280 mm galvanised-steel impeller driven by an external-rotor motor. It operates on single-phase 230 VAC within a 190–245 V range and draws 3.9 A for 890 W input power. The unit is rated for continuous duty between –20 °C and 60 °C with an L10 life of 30 000 hours at 40 °C.
Terminal plug with 400 mm leads for wiring
Installation requires connecting the bare-ended TR64 plug leads to a suitable 230 VAC supply and a 12.0 µF 450 V start capacitor that is not included. The IP10 protection level means the motor and impeller are open to dust and accidental contact, so the fan must be mounted inside a guarded enclosure. Incorrect capacitor sizing or voltage outside the 190–245 V window will prevent start-up or cause overheating.
890 W input power determines supply sizing
The 890 W rating at 3.9 A defines the circuit breaker, cable cross-section and contactor rating needed for safe operation. Buyers who need lower power consumption or a different voltage phase cannot use this model. The fixed 60 Hz speed and 81 dB(A) noise level also make it unsuitable for variable-speed or noise-sensitive applications.
Highlights
- High airflow 2565 m3/h for effective cooling
- 890 W input power drives strong performance
- 2740 rpm motor speed ensures rapid air movement
- IP10 protection with galvanized steel construction
- 30000 hours L10 life at 40 °C operating temperature
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the fan is running correctly after installation?
Confirm the motor reaches 2740 rpm, measure current draw near 3.9 A at 230 VAC, check airflow approaches 2565 m³/h and listen for noise around 81 dB(A).
What comes in the box and what must be sourced separately?
The unit includes the 280 mm galvanised-steel impeller with external-rotor motor and a 400 mm TR64 plug lead; you must supply a 12.0 µF/450 V start capacitor and mounting hardware.
Which voltage and frequency version should I select for my supply?
Choose the 230 VAC single-phase model rated for 190–245 V at 60 Hz; it draws 3.9 A and delivers 890 W input power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
