Fans
Fans 2RREu15Motor industrial cooling fan 180×38 mm 230 V 49/60 W 500/560 m³/h
Centrifugal industrial cooling fan delivering 500/560 m³/h airflow at 2610/2960 rpm from a 180×38 mm frame on 230 V power
- High airflow up to 560 m³/h for effective industrial cooling
- Dual-speed motor runs at 2610 or 2960 r/min to match demand
- Compact 180×38 mm centrifugal design fits tight equipment spaces
- Operates on standard 230 V AC supply without special wiring
- ECOFIT brand-new original unit with custom processing available
Industrial centrifugal fan for 230 V systems
The 2RREu15Motor is a centrifugal fan built for 230 V industrial equipment. It delivers 500 to 560 m³/h of airflow at 49 to 60 W power draw. The unit suits HVAC, drive cooling and machinery that require steady air movement at this voltage and capacity.
Compact 180 × 38 mm housing with custom mounting
The blade assembly measures 180 × 38 mm and runs at 2610 to 2960 rpm. Custom processing is available, so the mounting pattern and wiring can be adapted to the host cabinet or ductwork. This flexibility helps integrators fit the fan into existing PF700-series inverter enclosures or similar frames without redesign.
Replaces worn 230 V centrifugal units in 45–75 kW
The fan is specified for ECOFIT PF700 series inverters rated from 45 to 75 kW. It is a direct swap when the original 230 V centrifugal fan reaches end of life or when airflow has dropped below 500 m³/h. The jump is worth it when the existing housing accepts the 180 × 38 mm footprint and the control circuit supplies 230 V at the rated current.
Highlights
- High airflow up to 560 m³/h for effective industrial cooling
- Dual-speed motor runs at 2610 or 2960 r/min to match demand
- Compact 180×38 mm centrifugal design fits tight equipment spaces
- Operates on standard 230 V AC supply without special wiring
- ECOFIT brand-new original unit with custom processing available
Specifications
No published specifications for this item yet.
Questions about this item
What voltage and current does the 2RREu15Motor fan require?
It runs on 230 V and draws 43/053 A depending on the speed setting.
Will the 180×38 mm frame fit my existing mounting holes?
The blade diameter is 180 mm and the frame depth is 38 mm; check your cutout against those dimensions.
How do I wire the centrifugal fan to the PF700 series inverter?
Connect the 230 V supply to the fan terminals matching the 49/60 W rating; the common error is reversing the live and neutral leads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
