Eyemax
Eyemax XHM-202 HD-SDI outdoor dome analog camera
Wired 1080p HD-SDI dome with IP68 housing, 3.7 mm lens and 1000+ TVL resolution
- TypeWired Camera
- 1080p clarity from 2 MP SONY CMOS
- True day/night with ICR and 3DNR
- IP68 housing withstands water and dust
- Dual HD-SDI and analog outputs
- 7 mm fixed megapixel lens covers wide area
Outdoor HD-SDI Dome Camera
The Eyemax XHM-202 is a wired analogue camera built for exterior surveillance. It captures 1080p video through a 1/3 inch Sony CMOS sensor with progressive scan. The 3.7 mm fixed megapixel lens provides a constant field of view. Horizontal resolution reaches 1000+ TVL for detailed footage.
Rugged IP68 Housing and Dual Outputs
An IP68-rated housing protects the electronics against water and dust ingress. The medium 5 inch diameter dome resists vandalism while supporting an ICR mechanism for true day and night operation. Dual BNC outputs deliver both HD-SDI and analogue signals simultaneously. OSD control allows on-site adjustment of 3DNR, Sens-Up, HLM and BLC settings. Power requires a separate 12V DC supply.
Cabling Constraints for HD-SDI Transmission
The HD-SDI interface demands RG59 or RG6 coaxial cable to maintain signal integrity over distance. Using thinner or lower-grade coax will degrade the 1080p feed and limit reliable run lengths. The analogue output offers a fallback for legacy DVRs but does not bypass the HD-SDI cable requirement. Installers must plan cable routes and budgets around these specific coax types.
Highlights
- 1080p clarity from 2 MP SONY CMOS
- True day/night with ICR and 3DNR
- IP68 housing withstands water and dust
- Dual HD-SDI and analog outputs
- 7 mm fixed megapixel lens covers wide area
Specifications
| Type | Wired Camera |
|---|
Questions about this item
What resolution does the HD-SDI interface on the XHM-202 support?
The HD-SDI output delivers 1080p video at 2 megapixel resolution.
What size opening does the 5 inch diameter dome require for mounting?
The medium 5 inch diameter housing fits standard dome mounts; allow clearance for the fixed 3.7 mm lens and cable entry.
How do I access the OSD menu after connecting the camera?
Use the OSD control on the dual-output cable harness; the step often missed is selecting the correct output mode before adjusting 3DNR, Sens-Up, HLM or BLC settings.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



