We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel articulating TV wall mount with dual pivoting arms and wall plate

Explus-C

Explus-C MU0014 full-motion tv mount 26-55 in VESA 400x400 88 lbs

SKU CH-75TE-EFVYZ

Full-motion TV bracket for 26–55 inch screens up to 88 lbs, VESA 100×100 to 400×400, ±90° swivel, ±15° tilt, 2.5–18.9″ extension, single-stud mounting

  • Mount StyleWall Mount
  • Fits 26-55 inch TVs with VESA 100x100 to 400x400
  • Swivels +/-90° left or right for wide viewing angles
  • Tilts +5°/-15° to reduce screen glare
  • Extends 2.5" to 18.9" from wall for flexible positioning
  • Cold-rolled steel tested to four times the 88 lb rating

Explus-C MU0014 Full-Motion TV Mount

The Explus-C MU0014 is a full-motion wall bracket designed for flat and curved screens from 26 to 55 inches. It supports VESA patterns between 100x100 mm and 400x400 mm and carries a maximum load of 88 lbs. The mount attaches to single wood studs, brick, or concrete walls. It is not rated for drywall-only installation.

Swivel and Tilt Adjustments for Flexible Viewing

This articulating arm provides +/-90° swivel for corner viewing, though the maximum angle varies with screen size. Tilt ranges from +5° to -15° to reduce glare, while +/-3° post-installation leveling ensures a straight picture. The arm extends from 2.5 to 18.9 inches from the wall, allowing the screen to sit flush or pull out for access.

Cold-Rolled Steel Construction

Heavy-duty cold-rolled steel and fully robot-welded joints deliver a rigid frame stress-tested to four times the rated capacity. An included adapter bridges VESA patterns from 200x200 mm up to 400x400 mm, accommodating larger panels within the size range. Installers who need mounting on metal studs or ceilings must source separate hardware.

Highlights

  • Fits 26-55 inch TVs with VESA 100x100 to 400x400
  • Swivels +/-90° left or right for wide viewing angles
  • Tilts +5°/-15° to reduce screen glare
  • Extends 2.5" to 18.9" from wall for flexible positioning
  • Cold-rolled steel tested to four times the 88 lb rating

Specifications

Mount StyleWall Mount

Questions about this item

What wall types can I mount this MU0014 bracket on?

The bracket is designed for single wood studs, brick, or concrete walls. It is not rated for drywall alone, so you must anchor into a stud or masonry.

Will my existing TV with a 200x200 mm VESA pattern fit this mount?

Yes. The included adapter extends the mountable VESA range from 100x100 mm up to 400x400 mm, so a 200x200 mm pattern is fully supported.

How can I verify the mount is level after I hang the TV?

Use the +/-3° post-installation adjustment on the bracket arms to fine-tune the TV until it is perfectly level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.