Explus-C
Explus-C Full Motion TV Mount 13-42" VESA 75-200 44lb
Full-motion wall mount holds 13–42 in screens up to 44 lb with VESA 75–200, tilts 15°, swivels 180°, rotates 360° and installs on a single stud
- Mount StyleWall Mount
- Supports screens from 13 to 42 inches up to 44 lb
- Full motion: tilt 15°, swivel 180°, rotate 360° for any viewing angle
- VESA 75×75 to 200×200 compatibility covers most flat-panel displays
- Single-stud installation with built-in level and quick-release VESA plate
- Suitable for indoor, RV, outdoor, corner or kitchen mounting
Full-Motion Wall Mount 13-42 Inch
This articulating arm fits flat screens and monitors from 13 to 42 inches with a 44-pound capacity. It supports VESA patterns of 75x75, 100x100, 200x100 and 200x200 millimetres. The mount secures to a single wall stud using included hardware and a built-in level. A quick-release VESA plate allows the display to be detached in seconds.
Upgrade From Fixed or Tilt-Only Brackets
A fixed mount holds the screen flat against the wall and a tilt-only bracket cannot change viewing angles side-to-side. This unit adds 15 degrees of tilt, 180 degrees of swivel and 360-degree rotation for landscape or portrait orientation. The jump is worth it when seating positions vary or when glare from windows requires frequent repositioning.
Handles Small to Mid-Size Displays in Flexible
The 44-pound limit comfortably supports typical monitors and televisions up to 42 inches in living rooms, kitchens, corners or RV interiors. It runs out when the display exceeds the listed screen sizes, weighs more than 44 pounds or uses a VESA pattern outside the four supported standards. Buyers needing support for larger screens or heavier commercial panels should look elsewhere.
Highlights
- Supports screens from 13 to 42 inches up to 44 lb
- Full motion: tilt 15°, swivel 180°, rotate 360° for any viewing angle
- VESA 75×75 to 200×200 compatibility covers most flat-panel displays
- Single-stud installation with built-in level and quick-release VESA plate
- Suitable for indoor, RV, outdoor, corner or kitchen mounting
Specifications
| Mount Style | Wall Mount |
|---|
Questions about this item
What wall structure and VESA patterns does this mount require?
It attaches to a single wall stud and supports 75x75, 100x100, 200x100 and 200x200 VESA hole patterns.
How is the screen attached and what step is often missed?
The quick-release VESA plate screws to the display first, then slides onto the arm; the built-in level on the wall bracket must be used before tightening the lag bolt.
Which moving parts may need adjustment over time?
The tilt, swivel and 360-degree rotation joints can be re-tensioned with the supplied hex keys if they loosen.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



