We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel tilt TV wall mount bracket with articulated arms and built-in level

Explus-C

Explus-C EZ Series Tilt TV Mount 32-55in 154 lbs VESA 400x200

SKU CH-5ZHX-6ZP96

Tilt wall mount supports 32 to 55 inch TVs up to 154 lbs with VESA 75x75 to 400x200, UL certified, includes level and hardware

  • Mount StyleWall Mount
  • Fits 32 to 55 inch screens with VESA 75x75 to 400x200 patterns
  • Holds up to 154 lbs for secure mounting of heavy displays
  • UL certified for tested safety and reliability
  • Mounts on brick, concrete or wood stud walls
  • Built-in level and included hardware simplify installation

Explus-C EZ Series Tilt Mount for 32 to 55 Inch TVs

This wall bracket supports flat-panel televisions from 32 to 55 inches and carries up to 154 lbs. It suits living-room, bedroom or office installations where a fixed tilt angle improves viewing comfort. The mount fits VESA patterns from 75x75 up to 400x200 mm.

Passive thermal design

The bracket has no moving parts, fans or electronics, so it adds no heat, noise or electricity cost to the installation. Its steel construction simply transfers the display weight to the wall without any active cooling requirement.

UL certified steel build

Underwriter Laboratories certification confirms the mount meets recognised safety standards for structural load. A built-in bubble level helps achieve a straight fit on brick, concrete or wood-stud walls, and every bolt, anchor and spacer needed for those surfaces ships in the box. Buyers needing full-motion articulation or support for screens larger than 55 inches should choose a different mount style.

Highlights

  • Fits 32 to 55 inch screens with VESA 75x75 to 400x200 patterns
  • Holds up to 154 lbs for secure mounting of heavy displays
  • UL certified for tested safety and reliability
  • Mounts on brick, concrete or wood stud walls
  • Built-in level and included hardware simplify installation

Specifications

Mount StyleWall Mount

Questions about this item

How do I install the EZ Series tilt mount on a concrete wall, and what step is often missed?

Use the included concrete anchors and drill pilot holes to the specified depth; the step people miss is verifying the built-in level reads true before tightening the lag bolts fully.

What maintenance or replacement will this mount need over time?

No scheduled maintenance is required; only re-check bolt tightness after the first week and if the TV is repositioned, as hardware can settle.

What limit appears first during sustained use with a heavy TV near the 154 lb rating?

The 154 lb weight capacity is the primary limit; exceeding it risks structural failure, so confirm your TV’s actual weight stays at or below this figure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.