Everflow Supplies Inc.
Everflow Supplies Inc. C64R-383814-NL 3/8" x 3/8" x 1/4" O.D. COMP Tee Pipe Fitting
A lead-free brass compression tee joins three pipes at 90-degree intervals with a secure, leak-free seal for commercial and residential plumbing systems
- Secure 90° pipe junctions with compression tee design
- Leak-free compression bonds prevent water loss in systems
- Lead-free brass construction resists rust and corrosion
- Suitable for commercial and residential piping applications
- Prop 65 warning: contains lead, wash hands after handling
3/8" x 3/8" x 1/4" Compression Tee Fitting
This lead-free brass compression tee joins three pipes at 90° intervals within compression piping systems. It creates a secure compression bond that prevents water leakage. The fitting suits both commercial and residential plumbing installations.
Compression Interface Practical Limits
Compression fittings rely on ferrule deformation to seal, so tubing must be clean, round and cut square for a reliable joint. Over-tightening can crush thin-wall tubing while under-tightening leaves a leak path. The connection is not designed for repeated disassembly.
Installation Ease and Common Issues
Hand-tighten the nut then add one to two wrench turns to set the ferrule without damaging the brass body. The most frequent problem is debris or burrs on the tube end preventing a full seal. Always wash hands after handling because the product contains lead.
Highlights
- Secure 90° pipe junctions with compression tee design
- Leak-free compression bonds prevent water loss in systems
- Lead-free brass construction resists rust and corrosion
- Suitable for commercial and residential piping applications
- Prop 65 warning: contains lead, wash hands after handling
Specifications
| Brand | EVERFLOW |
|---|
Questions about this item
Which tee size should I pick for a 3/8-inch run with a 1/4-inch branch?
The C64R-383814-NL is built with a 3/8-inch by 3/8-inch run and a 1/4-inch branch, so it matches that exact combination in one fitting.
What does the 90-degree interval mean when the tee is installed?
The three ports are spaced at 90-degree intervals, giving a true tee layout that lets the branch line come off at a right angle to the main run.
What does the compression connection cap in practice?
The compression ends create a secure, leak-free joint on copper or compatible tubing without soldering, and the lead-free brass body resists rust and corrosion in commercial or residential systems.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
