Eternabond
Eternabond WB-2-50R Roof Repair Tape 2 in x 50 ft Gray
Self-adhesive roof repair tape covers 8.3 sq ft per roll and bonds to most surfaces in one hour
- TypeAlignment Tools
- Seals roofs instantly with MicroSealing technology
- 25 mil thickness blocks water permanently
- Gray finish resists UV degradation over time
- Adheres to all surfaces except silicone
- 50 foot roll covers 8.3 square feet per gallon
Eternabond RoofSeal Tape Specifications
Eternabond RoofSeal tape measures two inches wide by fifty feet long in a gray finish. It uses MicroSealing technology to create a permanent bond on virtually any roof surface except silicone. The twenty-five mil thickness provides a durable barrier against water intrusion. This roll covers approximately eight point three square feet per gallon equivalent.
Build Quality and Daily Use
UV protected material resists degradation from prolonged sun exposure on roofs. The tape achieves full cure in one hour for rapid weatherproofing after application. Flexible backing conforms to irregular roof contours without wrinkling or lifting. Adhesive activates on contact for immediate sealing performance.
Pre Order Compatibility Check
Verify the repair area contains no silicone coatings or sealants before ordering. Confirm the surface is clean, dry and structurally sound for proper adhesion. Ensure ambient temperature allows the one hour cure time to complete undisturbed. Check that the eight point three square foot coverage matches your repair scope.
Highlights
- Seals roofs instantly with MicroSealing technology
- 25 mil thickness blocks water permanently
- Gray finish resists UV degradation over time
- Adheres to all surfaces except silicone
- 50 foot roll covers 8.3 square feet per gallon
Specifications
| Brand | Eternabond |
|---|---|
| Type | Alignment Tools |
Questions about this item
How wide is the MicroSealing roof tape and what area can one roll cover?
The tape is 2 in wide and 50 ft long, giving a maximum coverage of 8.3 sq ft per roll.
What surface preparation or mounting does the tape need to adhere properly?
It bonds to all materials except silicone; the surface must be clean, dry and free of oils before application.
What is the correct way to install the tape so it seals without trapping air?
Apply firm, even pressure with a roller from the centre outward; skipping this step leaves bubbles that compromise the seal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
