ETCR
ETCR ETCR2000B+ Non-Contact Grounding Resistance Online Detector 0.01O~200O
Measures earth and loop resistance from 0.01 to 1200 ohms with 99-set data storage and audible/visible alarm threshold up to 199 ohms
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Measures earth resistance without contact down to 0.010 Ω
- Stores up to 99 data sets for later review
- Adjustable alarm threshold from 1 to 199 Ω with audible and visible alerts
- Certified explosion-proof to CE18.2380 Ex ia IIB T3 Ga
- Covers a wide measurement range from 0.01 Ω to 1200 Ω
What this instrument measures
The ETCR ETCR2000B+ is a clamp-type earth resistance tester that measures grounding and loop resistance from .010 ohms up to 1200 ohms without disconnecting the earth electrode. It is built for electricians and maintenance crews who need fast, non-contact verification on live installations.
Check your site before ordering
The tester carries an Exia II BT3 Ga explosion-proof rating and CE certificate 18.2380, so confirm the area classification matches this marking. You need a conductor large enough for the clamp jaws to close fully and the measured loop must fall within the .010 to 1200 ohm range for valid readings.
How it fits in your test kit
The unit stores up to 99 data sets and provides audible and visible alarms when resistance exceeds a user-set threshold from 1 to 199 ohms. Six-button panel operation starts measurements immediately with no warm-up delay, freeing you from long self-test waits and letting you move quickly between test points.
Highlights
- Measures earth resistance without contact down to 0.010 Ω
- Stores up to 99 data sets for later review
- Adjustable alarm threshold from 1 to 199 Ω with audible and visible alerts
- Certified explosion-proof to CE18.2380 Ex ia IIB T3 Ga
- Covers a wide measurement range from 0.01 Ω to 1200 Ω
Specifications
| Brand | ETCR |
|---|---|
| Model | ETCR2000B+ |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Does the ETCR2000B+ detector include test leads or is it a complete clamp-only kit?
The unit is a clamp-type earth resistance tester; the supplied package contains the detector itself and no separate test leads are required for non-contact measurements.
Should I select the 0.01 Ω to 200 Ω model or the 0.010 Ω to 1200 Ω version for general earthing checks?
The single model offered covers 0.010 Ω to 1200 Ω, so it handles both low-resistance bonds and higher loop resistances without needing a different variant.
What does the 0.01 Ω resolution mean when I am testing a typical industrial earth electrode?
A 0.01 Ω resolution lets you see small changes in electrode resistance, helping confirm whether the earth system meets the required low-impedance target.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
