ETCR
ETCR 8700 Power Failure Leakage Current Remote Alarm Monitor 0.00mA~60.0A F40mm
Monitors leakage current from 0.00mA to 60.0A and sends GSM alarm alerts for power failure or restoration with a 40mm clamp
- TypeTest Equipment
- Color/FinishRed
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- Monitors leakage current from 0.00 mA to 60.0 A
- Detects power failure and restoration events instantly
- Sends alarm SMS to multiple phone numbers via GSM
- Compatible with lines up to 600 V voltage
- 40 mm CT aperture fits standard conductors
Remote alarm monitor for power failure and leakage
The ETCR 8700 monitors AC current from 0.00mA to 60.0A and detects both power loss and leakage on lines below 600V. A built-in GSM module sends alarm SMS messages to multiple phone numbers when a fault occurs. The split-core current transformer has a 40mm aperture for non-invasive installation on existing conductors.
Electricians and facility teams needing remote
Suits maintenance staff who must know immediately when supply is lost or leakage appears on critical circuits. Not suited for installers who require local-only indication without cellular connectivity or who need to monitor voltages above 600V.
40mm CT aperture sets the maximum conductor size
The F40mm current transformer fits around cables or busbars up to 40mm in diameter, which determines the largest circuit the unit can monitor without additional hardware.
Highlights
- Monitors leakage current from 0.00 mA to 60.0 A
- Detects power failure and restoration events instantly
- Sends alarm SMS to multiple phone numbers via GSM
- Compatible with lines up to 600 V voltage
- 40 mm CT aperture fits standard conductors
Specifications
| Brand | ETCR |
|---|---|
| Model | 8700 |
| Type | Test Equipment |
| Color/Finish | Red |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the F40 mm CT fit around the same conductors I already use with my existing panel meters?
The CT caliber is F40 mm, so it accommodates conductors up to 40 mm in diameter; verify your existing cable size against that figure before installation.
How can I confirm the 8700 is actually sending leakage alarms to my phone after I wire it up?
Trigger a test leak or power-cut; the built-in GSM/GPRS module will push an alarm SMS to each programmed number, proving the monitoring chain works.
What ships in the box and what must I source locally before the 8700 can operate?
The box contains the monitor unit only; you must buy batteries and any temperature, humidity or infrared sensors separately, plus arrange a SIM for the GSM link.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
