We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium battery pack 68.0 by 37.2 by 18.6mm 119.0g 5200mAh 3.7V

Estry

Estry standard battery 5200mAh 3.7V for Sunmi P1 WS920 V2 W6900 V1S

SKU CH-QWJA-2Z937

Replacement lithium battery delivering 5200 mAh at 3.7 V for Sunmi P1, WS920, V2, W6900 and V1S handheld terminals

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity5000mAh
  • Battery Voltage3.7
  • 5200 mAh capacity extends operating time between charges
  • 7 V lithium chemistry matches original Sunmi specifications
  • ISO 9001, CE, RoHS, UN 38.3 and MSDS certifications confirm safety compliance
  • Overcharge, over-discharge, over-voltage and short-circuit protection safeguards the battery
  • Compact 68.0 x 37.2 x 18.6 mm design fits P1, WS920, V2, W6900 and V1S models

Direct Replacement for Sunmi Handhelds

This Estry battery replaces the original SMBP001 and SM-INR18650M26-1S2P packs used in the Sunmi P1, WS920, V2, W6900 and V1S terminals. It is built for technicians and operators who need a drop-in lithium cell without modification.

Single-Cell 3.7 V Chemistry Limits Runtime

The pack delivers 3.7 V from a 1S2P lithium configuration rated at 5200 mAh and 19.24 Wh. Capacity and voltage are fixed by the cell chemistry, so operating time scales directly with the terminal's current draw and cannot be extended by the battery itself.

5200 mAh Capacity Decides Fit

The 5200 mAh rating is the sole figure that determines whether this pack matches the original runtime spec. Verify the part numbers SMBP001 or SM-INR18650M26-1S2P on the existing battery before ordering.

Highlights

  • 5200 mAh capacity extends operating time between charges
  • 7 V lithium chemistry matches original Sunmi specifications
  • ISO 9001, CE, RoHS, UN 38.3 and MSDS certifications confirm safety compliance
  • Overcharge, over-discharge, over-voltage and short-circuit protection safeguards the battery
  • Compact 68.0 x 37.2 x 18.6 mm design fits P1, WS920, V2, W6900 and V1S models

Specifications

BrandSunmi
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity5000mAh
Battery Voltage3.7

Questions about this item

Which capacity should I pick — the 5000mAh spec or the 5200mAh spec?

The 5200mAh figure is the manufacturer-rated capacity for this replacement pack; the 5000mAh value appears in the generic specification table.

What does the 19.24Wh rating tell me about actual run-time in a Sunmi P1?

At 3.7V the pack stores 19.24Wh; real run-time depends on the device’s power draw, so divide that watt-hour figure by the terminal’s average watts to estimate hours.

Does the 3.7V lithium pack use a standard connector that fits the WS920 V2 and W6900 V1S?

Yes — it is built to the exact SMBP001 and SM-INR18650M26-1S2P part numbers, so the connector and pin-out match the original battery in those models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.