We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular Ni-MH battery pack with smooth grey finish, 58.26 by 42.24 by 9.65mm, 71.0g weight

Estry

Estry standard battery 500mAh 3.6V for Minitor V5 RLN5707

SKU CH-RG2N-YE8FW

Ni-MH replacement battery delivering 3.6 V and 500 mAh for Minitor V5 pagers using part numbers RLN5707 or RLN5707A

  • Specifications3.6
  • Battery Pack1 Year
  • 500 mAh capacity keeps your Minitor V5 pager running longer
  • 6 V Ni‑MH chemistry matches the original RLN5707 specifications exactly
  • Built‑in overcharge, over‑discharge, over‑voltage and short‑circuit protection extends cell life
  • Certified to ISO 9001, RoHS, CE and UN 38.3 for safety and quality
  • Compact 58.26 × 42.24 × 9.65 mm pack weighs only 71.0 g

Direct replacement for Minitor V5 pagers

The Estry standard battery matches the original RLN5707 specifications with a 500mAh capacity and 3.6V output. It uses Ni-MH chemistry and delivers 1.8Wh of energy in a pack measuring 58.26 x 42.24 x 9.65mm and weighing 71.0g. The unit carries ISO9001, RoHS, CE, UN38.3 and MSDS certifications and includes overcharge, over-discharge, over-voltage and short-circuit protection.

Steady output during extended shifts

Ni-MH chemistry provides a stable voltage curve across the discharge cycle, avoiding the sharp drop-off seen in some chemistries when the pager transmits repeatedly. Built-in protection circuits guard against deep discharge and voltage spikes that can shorten service life in 24/7 monitoring environments. The 500mAh rating supports typical duty cycles without requiring mid-shift swaps.

Drop-in fit with part-number verification

The pack slides into the Minitor V5 and Minitor 5 battery compartment using the original contacts, so no tools or soldering are needed. Installation fails only when the pager model or part number RLN5707 / RLN5707A is mismatched, so confirm both before ordering. Buyers who need a higher-capacity pack or a different voltage will not be served by this SKU.

Highlights

  • 500 mAh capacity keeps your Minitor V5 pager running longer
  • 6 V Ni‑MH chemistry matches the original RLN5707 specifications exactly
  • Built‑in overcharge, over‑discharge, over‑voltage and short‑circuit protection extends cell life
  • Certified to ISO 9001, RoHS, CE and UN 38.3 for safety and quality
  • Compact 58.26 × 42.24 × 9.65 mm pack weighs only 71.0 g

Specifications

BrandNi-MH
Model500mAh
Specifications3.6
Battery Pack1 Year

Questions about this item

How much heat or power draw does the 3.6V 500mAh Ni-MH pack generate during continuous all-day paging use?

The pack stores 1.8Wh at 3.6V and 500mAh; Ni-MH chemistry runs cool with no active cooling, so heat and power draw stay minimal during extended standby and alert cycles.

What charger or pager hardware must I already own for this RLN5707 replacement to work?

You need a Motorola Minitor V5 or Minitor 5 pager that originally uses the RLN5707 or RLN5707A pack; the battery slides into the pager’s dedicated compartment and charges on the standard Minitor desktop charger.

Will this 58.26 x 42.24 x 9.65mm, 71.0g pack fit and charge correctly in an older Minitor V pager I still use?

No — the dimensions and connector are specific to Minitor V5 and Minitor 5 models; earlier Minitor V units use a different battery form factor and part number.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.