We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular lithium battery pack with wires, 46 by 36 by 5 millimetres, green circuit board visible

Estry

Estry Standard Battery 3.7V 850mAh for Dell PERC H710 H710P PowerEdge R620 T420

SKU CH-3HC3-0F1PC

3.7 V lithium replacement battery with 850 mAh capacity for Dell PERC H710 and H710P RAID controllers in PowerEdge R620 and T420 servers

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity850mAh
  • Battery Voltage3.7
  • Replaces original PERC H710 battery with exact-fit 3.7V 850mAh lithium cell
  • Protects RAID cache during power loss with overcharge, over-discharge and short-circuit safeguards
  • Certified to ISO 9001, RoHS, CE and UN38.3 for safety and quality
  • Compact 46.12 x 36.2 x 5.14 mm design weighs only 42.8 g
  • Compatible with Dell part numbers 07VJMH, 70K80, 37CT1, H132V and T40JJ

Direct replacement for Dell PERC controllers

This lithium battery replaces the original cache backup unit in Dell PERC H710 and H710P controllers used in PowerEdge R620 and T420 servers. It matches the factory part numbers including 07VJMH, 70K80, 070K80, 37CT1, H132V, 7VJMH and T40JJ. The pack restores write-back cache protection during unexpected power loss.

Compact lithium cell with safety certifications

The single-cell pack measures 46.12 by 36.2 by 5.14 millimetres and weighs 42.8 grams, fitting the controller's existing battery slot without modification. Built-in circuitry provides overcharge, over-discharge, over-voltage and short-circuit protection. The cell carries ISO9001, RoHS, CE, UN38.3 and MSDS certifications for safe handling and transport.

Ready-to-install backup power

Supplied as a one-pack unit, the battery requires no additional cables, brackets or configuration software. Installation consists of removing the depleted cell and inserting this replacement, after which the controller automatically recognises the restored backup capacity. Buyers needing multi-pack kits or higher-capacity alternatives will need a different product.

Highlights

  • Replaces original PERC H710 battery with exact-fit 3.7V 850mAh lithium cell
  • Protects RAID cache during power loss with overcharge, over-discharge and short-circuit safeguards
  • Certified to ISO 9001, RoHS, CE and UN38.3 for safety and quality
  • Compact 46.12 x 36.2 x 5.14 mm design weighs only 42.8 g
  • Compatible with Dell part numbers 07VJMH, 70K80, 37CT1, H132V and T40JJ

Specifications

BrandDELL
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity850mAh
Battery Voltage3.7

Questions about this item

What battery voltage and capacity does the Estry replacement supply for the PERC H710 controller?

The pack delivers 3.7 V and 850 mAh, matching the original specifications for the PERC H710 and H710P controllers.

Will the 46.12 mm by 36.2 mm by 5.14 mm battery fit inside a PowerEdge R620 or T420 chassis?

Yes, those dimensions and the 42.8 g weight are identical to the Dell 07VJMH and 70K80 modules, so it seats correctly in the RAID controller slot.

How is the battery installed and which orientation mistake should be avoided?

Power down the server, open the chassis, unplug the old module from the PERC H710 or H710P board, then press the new pack in with the connector key aligned — reversing the polarity will prevent the controller from recognising the battery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.