Estry
Estry Standard Battery 230mAh 3.7V for Pro 9470/9450/9460/9465/9400/9400SH
Replacement lithium battery rated 230 mAh and 3.7 V for Pro 9470, 9450, 9460, 9465, 9400 and 9400SH devices
- TypeBatteries
- Battery Pack1-pack
- Battery TypeLithium
- Battery Capacity230mAh
- Battery Voltage3.7
- Fits Pro 9470 9450 9460 9465 9400 9400SH
- 230mAh 3.7V lithium cell matches original specs
- 35 x 20.0 x 4.0mm form factor drops straight in
- Overcharge over-discharge over-voltage short-circuit protection built in
- Certified ISO9001 RoHS CE UN38.3 MSDS compliant
Direct Replacement Battery
This 230mAh 3.7V lithium pack matches the original specifications for the Pro 9470, 9450, 9460, 9465, 9400 and 9400SH. It replaces part numbers AHB412434PJ and 14192-00 with a 1-pack format. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuits.
Upgrade From Degraded Cells
Swap this in when the original battery no longer holds a useful charge or shows swelling. The jump is worth it if runtime has dropped below half of the rated 0.85Wh capacity. It restores the factory voltage and capacity without requiring hardware modifications.
Steady Output Under Load
The cell maintains 3.7V through continuous discharge thanks to the integrated protection circuit. ISO9001, RoHS, CE, UN38.3 and MSDS certifications confirm consistent manufacturing quality. At 35.35 x 20.0 x 4.0mm and 30.5g it fits the existing compartment without forcing the enclosure.
Highlights
- Fits Pro 9470 9450 9460 9465 9400 9400SH
- 230mAh 3.7V lithium cell matches original specs
- 35 x 20.0 x 4.0mm form factor drops straight in
- Overcharge over-discharge over-voltage short-circuit protection built in
- Certified ISO9001 RoHS CE UN38.3 MSDS compliant
Specifications
| Type | Batteries |
|---|---|
| Battery Pack | 1-pack |
| Battery Type | Lithium |
| Battery Capacity | 230mAh |
| Battery Voltage | 3.7 |
Questions about this item
What are the exact dimensions of this 230mAh battery so I can confirm it fits my Pro 9470?
The pack measures 35.35 x 20.0 x 4.0mm and weighs 30.5g, matching the original AHB412434PJ form factor for the listed Pro models.
Which connector orientation or polarity step is most often missed when swapping this 3.7V pack into a Pro 9460?
Align the ribbon cable exactly as the original 14192-00 sits; the keyed plug only seats one way, and forcing it reverses polarity.
After how many charge cycles should I expect to replace this lithium pack in my Pro 9400SH?
Replace the battery when run-time drops below useful levels; the cell carries ISO9001, RoHS, CE, UN38.3 and MSDS certification for safe long-term use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



