Estry
Estry standard battery 1500mAh 3.7V for MegaRAID 9260 9260-8i 9280 9261 IBBU08 L3-25343-13B BAT1S1P
Replacement Li-ion battery delivers 1500 mAh at 3.7 V for LSI MegaRAID 9260, 9260-8i, 9280 and 9261 controller cache modules
- TypeRechargeable Batteries
- Battery Capacity1500mAh
- Battery Voltage3.7
- Replaces original MegaRAID cache battery exactly
- 1500mAh 3.7V Li-ion capacity powers controller cache
- Overcharge, over-discharge, short-circuit protection built in
- Certified ISO9001, RoHS, CE, UN38.3, MSDS
- Compact 76.1 x 53.56 x 15.06mm fits IBBU08 slot
Exact replacement for MegaRAID controllers
This Estry battery matches the original specifications for LSI MegaRAID 9260, 9260-8i, 9280 and 9261 cache modules. It uses a Li-ion cell rated at 1500mAh and 3.7V, delivering 5.55Wh. The pack includes overcharge, over-discharge, over-voltage and short-circuit protection. It is certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.
Suits administrators refreshing cache backup units
The cell fits the IBBU08, L3-25343-13B and BAT1S1P part numbers used on the listed MegaRAID cards. It is not suitable for other RAID controllers, different LSI generations or any non-LSI hardware. Buyers who need a higher capacity, a different voltage or a different form factor should look elsewhere.
Verify the part number on your existing module
Check that your current battery carries the IBBU08, L3-25343-13B or BAT1S1P label before ordering. Confirm the controller model is one of the four MegaRAID models listed above. The physical dimensions are 76.1 x 53.56 x 15.06mm and the weight is 105.6g; ensure the cache module enclosure can accept this size.
Highlights
- Replaces original MegaRAID cache battery exactly
- 1500mAh 3.7V Li-ion capacity powers controller cache
- Overcharge, over-discharge, short-circuit protection built in
- Certified ISO9001, RoHS, CE, UN38.3, MSDS
- Compact 76.1 x 53.56 x 15.06mm fits IBBU08 slot
Specifications
| Brand | LSI |
|---|---|
| Type | Rechargeable Batteries |
| Battery Capacity | 1500mAh |
| Battery Voltage | 3.7 |
Questions about this item
Which MegaRAID controller models accept the IBBU08 battery part number?
The replacement battery fits MegaRAID 9260, 9260-8i, 9280 and 9261 controllers that use the IBBU08 module.
Will the 1500mAh cell fit the existing IBBU08 housing without modification?
Dimensions are 76.1 x 53.56 x 15.06 mm and weight is 105.6 g, matching the original IBBU08 form factor.
What indicates the pack is charging correctly after installation?
The controller’s battery-status LED will show a charging state and the firmware will report 3.7 V and 5.55 Wh once the pack reaches full capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



