We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular 7.2V Ni-MH battery pack, dark plastic casing, wire lead visible

Estry

Estry 7.2V 2000mAh Ni-MH Battery Replacement for Scanreco 592 590 Fassi RC400 FBS590 EA2512

SKU CH-M13A-NN0K0

A 7.2 V, 2000 mAh Ni-MH replacement pack for Scanreco 590, 592 and Fassi RC400 crane remotes

  • Specifications7.2
  • Battery Pack1 Year
  • 2V 2000mAh Ni-MH chemistry delivers 14.4Wh runtime for crane remotes
  • Built to original 150.25×50.12×28.4mm 412.0g form factor for exact fit
  • Certified ISO9001 RoHS CE UN38.3 MSDS for safety compliance
  • Overcharge over-discharge over-voltage short-circuit protection extends cell life
  • Replaces Scanreco 592 590 Fassi RC400 FBS590 EA2512 part numbers

Replacement Battery for Scanreco and Fassi Controls

This 7.2V Ni-MH pack replaces the original power source in Scanreco 592, 590 and Fassi RC400 remote units. It matches the factory voltage and connector layout so the controller powers on without modification. The pack is built to the same physical envelope as the OEM cell.

7.2 Volt Nominal Output Decides Compatibility

The single figure that determines fit is the 7.2V rating; the controller expects exactly this potential. A higher or lower voltage pack will not operate the radio safely. Verify the original label shows 7.2V before ordering.

2000mAh Capacity Runs a Full Shift

At 2000mAh the pack delivers roughly 14.4Wh, enough for a typical crane operator’s work day. Runtime falls off in cold weather or when the transmitter runs at maximum output continuously. Heavy users should keep a charged spare on hand.

Highlights

  • 2V 2000mAh Ni-MH chemistry delivers 14.4Wh runtime for crane remotes
  • Built to original 150.25×50.12×28.4mm 412.0g form factor for exact fit
  • Certified ISO9001 RoHS CE UN38.3 MSDS for safety compliance
  • Overcharge over-discharge over-voltage short-circuit protection extends cell life
  • Replaces Scanreco 592 590 Fassi RC400 FBS590 EA2512 part numbers

Specifications

BrandNi-MH
Model2000mAh
Specifications7.2
Battery Pack1 Year

Questions about this item

What does the 7.2V 2000mAh rating mean for actual runtime in a Scanreco 592 remote?

The 7.2V 2000mAh pack stores 14.4Wh, giving roughly the same operating time as the original Scanreco 592 battery under identical load conditions.

Which connector standard does this pack use so it fits the RC400 or FBS590 without adapters?

It is built to the exact mechanical and electrical specification of the original 708031757 and 16131 packs, so it plugs straight into the RC400, FBS590, EA2512 and other listed models.

Will the 150.25 x 50.12 x 28.4mm case and 412.0g weight fit the battery compartment on a Fassi Mini or Maxi unit?

Yes — those dimensions and weight match the OEM pack, so the replacement seats securely in the Fassi Mini, Maxi and compatible Scanreco housings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.