We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular lithium battery pack, flat grey finish, labelled 2800mAh 3.7V

Estry

Estry 2800mAh 3.7V Lithium Battery MLP604193 for Autel TS508 TS408 TS508K

SKU CH-4CS8-VKTYP

Replacement lithium battery for Autel TPMS tools, 2800 mAh at 3.7 V with protection circuits

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity2800mAh
  • Battery Voltage3.7
  • 2800mAh capacity powers longer TPMS sessions
  • 7V 10.36Wh lithium cell matches original specs
  • Fits Autel TS508 TS408 TS508K MLP604193
  • Built-in overcharge and short-circuit protection
  • Certified ISO9001 RoHS CE UN38.3 MSDS

Replacement Battery for Autel TPMS Tools

This Estry lithium battery replaces the original MLP604193 pack in Autel MaxiTPMS TS508, xiTPMS TS408 and TS508K diagnostic tools. It delivers 3.7V and 2800mAh capacity, matching the factory voltage and runtime specifications. The cell includes overcharge, over-discharge, over-voltage and short-circuit protection circuits.

Suits Technicians Needing a Direct Swap

The pack fits the listed Autel models without modification and carries ISO9001, RoHS, CE, UN38.3 and MSDS certifications. Shops or owners using other TPMS devices or requiring a different voltage, capacity or form factor should verify their specific part number before ordering.

Critical Spec: 3.7V 2800mAh Lithium Cell

The 3.7 volt, 2800 milliampere-hour rating determines whether this cell matches the tool's power requirements. If the original battery label shows a different voltage or capacity, this unit will not be compatible.

Highlights

  • 2800mAh capacity powers longer TPMS sessions
  • 7V 10.36Wh lithium cell matches original specs
  • Fits Autel TS508 TS408 TS508K MLP604193
  • Built-in overcharge and short-circuit protection
  • Certified ISO9001 RoHS CE UN38.3 MSDS

Specifications

BrandAutel
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity2800mAh
Battery Voltage3.7

Questions about this item

How do I install the Estry MLP604193 battery in my Autel TS508 and what step do people often miss?

Remove the rear cover screws, disconnect the old pack, connect the new 3.7V 2800mAh unit matching the polarity, then refit the cover; the step often missed is verifying the connector clicks fully into place before sealing the case.

What maintenance or replacement will the Estry 2800mAh lithium pack need over time?

The 10.36Wh lithium cell requires no scheduled maintenance; expect to replace it once capacity drops below usable levels for TPMS diagnostics, typically after several hundred charge cycles.

What limit appears first when the Estry MLP604193 runs continuously in an Autel TS408?

Sustained use drains the 2800mAh capacity until the protection circuit triggers low-voltage cut-off, which is the first hard limit reached during extended TPMS sessions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.