We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Estry

Estry 2500mAh 7.2V Standard Battery for Fluke Bioal Varta P-1505 BP1735

SKU CH-EEF3-6A8YG

Ni-MH replacement battery delivers 7.2 V and 2500 mAh for Fluke Bioal Varta multimeter P-1505 and part BP1735

  • Specifications7.2
  • Battery Pack1 Year
  • Replacement matches original specifications for Fluke Bioal Varta P-1505
  • 2 V 2500 mAh Ni-MH delivers 18.0 Wh capacity
  • Overcharge, over-discharge, over-voltage and short-circuit protection included
  • Certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards
  • Compact 152.0 x 34.0 x 17.8 mm pack weighs 263.2 g

Direct Replacement for Fluke Bioal Varta P-1505

This Estry Ni-MH pack matches the original 7.2 V, 2500 mAh specification for the Bioal Varta multimeter P-1505 and part number BP1735. It delivers 18.0 Wh of energy in a sealed cell assembly. The unit is built to the same electrical and mechanical tolerances as the factory battery.

Fits the Meter Without Modification

The pack measures 152.0 x 34.0 x 17.8 mm and weighs 263.2 g, so it seats directly in the existing compartment. No wiring adapters or case alterations are required. Integrated protection guards against overcharge, over-discharge, over-voltage and short circuits, preserving both the meter and the cells.

Steady Output During Extended Sessions

Under continuous load the chemistry maintains a stable 7.2 V rail without the voltage sag common in aged packs. The 2500 mAh capacity supports long measurement cycles between charges. ISO 9001, RoHS, CE, UN 38.3 and MSDS certifications confirm consistent manufacturing quality.

Highlights

  • Replacement matches original specifications for Fluke Bioal Varta P-1505
  • 2 V 2500 mAh Ni-MH delivers 18.0 Wh capacity
  • Overcharge, over-discharge, over-voltage and short-circuit protection included
  • Certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards
  • Compact 152.0 x 34.0 x 17.8 mm pack weighs 263.2 g

Specifications

BrandNi-MH
Model2500mAh
Specifications7.2
Battery Pack1 Year

Questions about this item

How long will the 2500mAh capacity last before the 7.2V output drops under continuous load?

The pack delivers 18.0Wh at 7.2V and 2500mAh, so runtime depends on the multimeter's current draw; higher loads deplete the capacity faster.

Does the Ni-MH pack run hot or draw extra power when the multimeter is used all day?

The battery weighs 263.2g and measures 152.0 x 34.0 x 17.8mm; Ni-MH chemistry generates modest warmth during extended discharge but no active cooling is required.

Which Fluke Bioal Varta multimeter part number must I already own for this BP1735 replacement to fit?

This pack is built for the Bioal Varta multimeter P-1505 and replaces the original BP1735 part number; confirm your device matches before ordering.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.