We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black metal 1U rack switch with 48 RJ45 ports and four SFP+ cages

ESCAM Technology Co., Ltd

ESCAM Technology Co., Ltd ONV-POE36048PFM 48-port 10G Managed PoE network switch

SKU CH-V3HF-A2C7G MPN ONV-POE36048PFM

48 gigabit PoE ports plus four 10G uplinks deliver 368 Gbps switching with 650 W power budget and Layer 2+ management

  • Switch TypePOE Switch
  • Package Contents1
  • 48 PoE+ ports power cameras and access points up to 30W each
  • 4 ten-gigabit SFP+ uplinks deliver 10G backbone connectivity
  • 368G switching capacity handles heavy traffic loads without bottlenecks
  • L2+ management via web CLI Telnet SNMP gives full network control
  • 650W total PoE budget supports all 48 ports simultaneously

48-port 10G managed PoE switch

The ONV-POE36048PFM delivers 48 PoE-enabled RJ45 ports and four 10G SFP+ uplinks for high-density access deployments. It targets network engineers who need Layer 2+ management, VLAN segmentation and PoE+ power for IP cameras or wireless access points. The 368G switching fabric handles aggregation traffic without oversubscription. A single console port provides out-of-band CLI access.

Sustained-load behaviour

Each PoE port supplies up to 30W while the total power budget remains 650W, so full 30W on every port simultaneously is not possible. The 32K MAC address table and 9.6K jumbo-frame support maintain forwarding stability during prolonged bursts. Spanning-tree STP and RSTP protect topology convergence under continuous link flaps. MTBF is rated at 100000 hours for uninterrupted operation.

Installation notes

Default PoE pin-out uses end-span (1/2+, 3/6-); mid-span (4/5+, 7/8-) is optional and must be specified at order time. Per-port PoE enable, disable and priority are configured through web, CLI, telnet or SNMP interfaces. Cable-diagnostics assist fault isolation on long copper runs. Buyers who need redundant power inputs or more than four 10G uplinks should evaluate other models.

Highlights

  • 48 PoE+ ports power cameras and access points up to 30W each
  • 4 ten-gigabit SFP+ uplinks deliver 10G backbone connectivity
  • 368G switching capacity handles heavy traffic loads without bottlenecks
  • L2+ management via web CLI Telnet SNMP gives full network control
  • 650W total PoE budget supports all 48 ports simultaneously

Specifications

BrandONV
ModelONV-POE36048PFM
Switch TypePOE Switch
Package Contents1

Questions about this item

How much heat and power draw should I expect when all 48 PoE ports are running at the 30 W maximum?

The switch has a total input power budget of 650 W, so with every port delivering up to 30 W the combined PoE load can reach the full budget and the chassis will dissipate that amount as heat.

What cabling and SFP+ modules do I need to use the four 10G uplinks?

The four 10G SFP+ cages accept standard SFP+ transceivers; you must supply the modules and matching fibre or direct-attach cables for the uplinks.

Will my older 10/100 Mbps cameras and access points work on the 48 RJ45 ports without manual speed configuration?

Each RJ45 port auto-negotiates down to 10 or 100 Mbps, so legacy PoE devices connect and receive power immediately at their native speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.