We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow industrial watertight straight blade plug with thermoplastic elastomer housing

Ericson

Ericson 1516-PW6P-AM Watertight Straight Blade Plug 6-20P 20 A 250V AC Yellow

SKU CH-CSVY-2VRD1

Watertight industrial straight-blade plug rated 20 A at 250 V AC with IP69K protection and antimicrobial housing for cable diameters from .3 to .625 in

  • TypeStraight Blade Devices
  • Color/FinishYellow
  • Watertight IP69K rating protects against high-pressure washdowns
  • Antimicrobial housing resists bacterial growth on the surface
  • Industrial-grade thermoplastic elastomer withstands harsh environments
  • Accepts cable diameters from .3 to .625 in for flexible wiring
  • 20 A 250 V AC NEMA 6-20P plug powers demanding equipment

Industrial Watertight Plug 6-20P

This Ericson 1516-PW6P-AM is a straight-blade plug rated 20 A at 250 V AC with a NEMA 6-20P configuration. Its yellow thermoplastic elastomer housing meets IP69K for wash-down environments and includes antimicrobial resistance. The device accepts cable diameters from 0.3 in to 0.625 in and carries a 2 hp motor rating for single-phase industrial equipment.

Suits wet-area machinery.

Maintenance teams wiring 250 V single-phase motors, pumps or heaters in food-processing or outdoor plants will find the watertight seal and antimicrobial housing appropriate. Installations that need a neutral conductor, a different NEMA pin layout, or voltage below 250 V AC cannot use this plug. Builders running three-phase loads or requiring a locking connector should select another device.

Deciding spec: NEMA 6-20P at 20 A 250 V AC

The NEMA 6-20P rating fixes the plug to 20 A, 250 V AC, two-pole, three-wire service without a neutral. If the circuit or equipment calls for any other voltage, amperage or pin arrangement, this part will not fit. Match the nameplate on the load to 20 A 250 V single-phase before specifying this plug.

Highlights

  • Watertight IP69K rating protects against high-pressure washdowns
  • Antimicrobial housing resists bacterial growth on the surface
  • Industrial-grade thermoplastic elastomer withstands harsh environments
  • Accepts cable diameters from .3 to .625 in for flexible wiring
  • 20 A 250 V AC NEMA 6-20P plug powers demanding equipment

Specifications

BrandERICSON
TypeStraight Blade Devices
Color/FinishYellow

Questions about this item

How do I confirm the IP69K watertight seal is working after wiring the 6-20P plug?

After assembly, inspect the gasket seating and tighten the cable gland until the 0.3–0.625 in cable is firmly gripped; the yellow thermoplastic elastomer housing should show no gaps, and the antimicrobial surface remains intact.

What comes in the box and what must I supply for the 1516-PW6P-AM plug?

The plug body, blades and internal gasket are included; you must provide a 250 V AC cable with an outer diameter between 0.3 and 0.625 in and suitable 20 A rated conductors.

Which NEMA configuration matches a 20 A 250 V single-phase circuit for this industrial-grade plug?

The 6-20P configuration listed is the correct NEMA straight-blade choice for 20 A, 250 V AC, single-phase loads up to 2 hp.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.