Ergotron
Ergotron HX Dual Monitor Arm Polished Aluminum 32 Inch 17.5 lbs
Holds two screens up to 32 inches and 17.5 lbs each, lifts 11.5 inches to 20.6 inches high with 360-degree rotation and 75-degree tilt.
- TypeMounting Kit
- Supports two 32 inch screens up to 17.5 lbs each
- VESA 75x75 and 100x100 mounting patterns included
- Raises monitors 11.5 inches to 20.6 inches above desk
- Hinged bow folds outward for easy screen sharing
- Clamp fits 0.6 to 2.6 inch edges plus grommet option
Dual Monitor Arm for 32 Inch Screens
The Ergotron HX arm holds two monitors up to 32 inches diagonal and between 5 and 17.5 lbs each. It supports VESA 75x75mm and 100x100mm patterns. The polished aluminium construction suits home offices and collaborative workspaces needing flexible dual-screen positioning.
Clamp and Grommet Mounts Included
The box provides a two-piece desk clamp for surfaces 0.6 to 2.6 inches thick and a grommet mount for through-hole installation. A hinged bow lets screens fold outward for sharing, while each pivot adjusts rotation, pan and tilt independently. An optional Triple Monitor Bow Kit (98-009-026) can expand the setup later.
Check Desk Thickness and Monitor Weight
Verify your desktop edge falls within the 0.6 to 2.6 inch clamp range or that a suitable grommet hole exists. Confirm each monitor weighs between 5 and 17.5 lbs and measures no more than 32 inches diagonally. The arm lifts screens 11.5 inches for a maximum height of 20.6 inches above the desk.
Highlights
- Supports two 32 inch screens up to 17.5 lbs each
- VESA 75x75 and 100x100 mounting patterns included
- Raises monitors 11.5 inches to 20.6 inches above desk
- Hinged bow folds outward for easy screen sharing
- Clamp fits 0.6 to 2.6 inch edges plus grommet option
Specifications
| Type | Mounting Kit |
|---|
Questions about this item
Will the desk clamp or grommet hardware need periodic tightening after months of daily height adjustments?
The two-piece desk clamp fits surfaces .6 to 2.6 inches thick and the grommet mount threads through a desk hole; both use standard hex bolts that can be re-tightened with a common Allen key if they loosen over time.
At what point does the 17.5-pound-per-monitor limit stop the arm from holding position smoothly?
Each pivot is rated for 5 to 17.5 lbs; once a monitor exceeds 17.5 lbs the internal spring can no longer counterbalance the weight and the screen will drift downward.
Does the polished aluminum finish or the gas-spring mechanism generate noticeable heat or noise during all-day operation?
The arm uses a passive gas spring with no motor or fan, so it produces no audible noise and no measurable heat regardless of how long the monitors stay raised.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



