Ergear
Ergear Dual Monitor Arm 13-32 in 100x100mm 2 in 1 accessory
Dual monitor arm holds 13–32 in screens up to 19.8 lbs each with 75×75 mm or 100×100 mm VESA, tool-free mounting, and full tilt, swivel, and 360° rotation
- Supports 13 to 32 inch screens up to 19.8 lbs each
- Tool-free VESA plate fits 75x75mm and 100x100mm patterns
- Independent height adjustment up to 17.5 inches per arm
- Full motion with +80/-50 tilt, 90 swivel, 360 rotation
- C-clamp for desks 0.39 to 2.56 thick or grommet to 2.95 thick
Dual Monitor Arm for 13 to 32 Inch Screens
The Ergear dual monitor arm holds two flat or curved displays from 13 to 32 inches. Each screen can weigh up to 19.8 lbs and must match a 75x75mm or 100x100mm VESA pattern. It suits home offices or workstations needing two monitors on a single mount.
Tool-Free VESA Mounting and Desk Attachment
Installation uses a tool-free VESA plate that clicks onto monitors in three steps. The one-piece C-clamp fits desks 0.39 to 2.56 inches thick, while the optional grommet mount accepts 0.39 to 2.95 inches. The supplier recommends wooden desks without a crossbeam blocking the underside.
Full Motion Range with Independent Adjustment
Each arm offers independent height adjustment up to 17.5 inches and extension up to 18.1 inches. Tilt ranges from +80 to -50 degrees, swivel reaches 90 degrees, and rotation covers 360 degrees. This flexibility lets users align screens for sitting, standing or collaborative viewing.
Highlights
- Supports 13 to 32 inch screens up to 19.8 lbs each
- Tool-free VESA plate fits 75x75mm and 100x100mm patterns
- Independent height adjustment up to 17.5 inches per arm
- Full motion with +80/-50 tilt, 90 swivel, 360 rotation
- C-clamp for desks 0.39 to 2.56 thick or grommet to 2.95 thick
Specifications
No published specifications for this item yet.
Questions about this item
What VESA patterns does the dual monitor arm support and what is the maximum load per arm?
The arm supports VESA 75x75mm and 100x100mm patterns with a maximum load of 19.8 lbs per monitor.
What desk thicknesses are compatible with the included C-clamp and optional grommet mount?
The C-clamp fits desks 0.39 to 2.56 inches thick while the grommet mount fits desks 0.39 to 2.95 inches thick.
How is the VESA plate attached and what clearance is required underneath the desk?
The upgraded VESA plate installs tool-free in three steps and requires a wooden desk with no crossbeam blocking the underside for the clamp or grommet.
New to this? Buying a laptop with crypto, start to finish — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
