Enventor 7.5 Amp 1/2 Inch Hammer Drill 900W 0-3000RPM 360° Handle 9pcs Bit
Corded 900W hammer drill delivers 0-3000RPM variable speed with hammer and drill modes, 360° auxiliary handle, 1/2 inch metal chuck and nine bits
- Size/Dimensions10.0 in x 10.0 in x 2.5 in
- MaterialMetal And Plastic
- Typehammer_drill
- Weight2.631 kilograms
- Drills wood, steel and lightweight concrete up to 13 mm
- 12-speed dial and variable trigger match speed to material
- Hammer and drill modes cover masonry, metal and timber
- 360° rotating auxiliary handle improves control and comfort
- 1/2 inch all-metal keyed chuck secures bits quickly
Lightweight Hammer Drill for General Use
The Enventor 7.5 Amp hammer drill weighs 2.631 kilograms and delivers up to 3000 RPM for wood, steel and lightweight concrete. It suits DIYers and tradespeople who need a corded tool for everyday drilling and light hammer tasks. The 10.0 in x 10.0 in x 2.5 in body keeps the tool manageable during extended work. It is not intended for reinforced concrete or heavy masonry.
Check Power Supply and Chuck Compatibility
Verify that the jobsite provides a corded-electric outlet because the drill has no battery option. The 1/2 inch metal keyed chuck accepts bits up to 13 mm in concrete, 10 mm in steel and 25 mm in wood. Ensure your accessories match these capacities before starting. The 360° rotatable auxiliary handle fits the operator’s grip but requires clearance to rotate freely.
Sustained Load Behaviour and Safety
Under continuous high-load drilling the motor may emit smoke; the manufacturer advises stopping immediately and letting it cool before resuming. The 12-level speed knob lets you match RPM to material hardness, reducing heat build-up during long sessions. A lock button holds the trigger for steady operation, while the forward/reverse switch helps clear stuck bits without overloading the motor.
Highlights
- Drills wood, steel and lightweight concrete up to 13 mm
- 12-speed dial and variable trigger match speed to material
- Hammer and drill modes cover masonry, metal and timber
- 360° rotating auxiliary handle improves control and comfort
- 1/2 inch all-metal keyed chuck secures bits quickly
Specifications
| Brand | Enventor |
|---|---|
| Size/Dimensions | 10.0 in x 10.0 in x 2.5 in |
| Material | Metal And Plastic |
| Type | hammer_drill |
| Weight | 2.631 kilograms |
Questions about this item
What accessories come in the box and is anything else required to start drilling?
The package includes the hammer drill and nine drill bits. A 1/2 inch metal keyed chuck is built in, so no separate chuck is needed. The tool is corded-electric, so only a mains outlet is required.
Which drilling capacity should I match to my material — concrete, steel or wood?
Maximum capacities are concrete 13 mm, steel 10 mm and wood 25 mm. Choose the mode with the grey dual-mode switch: drill only for steel and wood, hammer drill for lightweight concrete and brickwork.
What does the 3000 RPM no-load speed mean when I am actually drilling?
3000 RPM is the maximum no-load speed. Under load the speed drops; the 12-position speed knob lets you select the right torque level for each material so the bit stays under control.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
