We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 90 degree DIN5P MIDI cable 1.5m with two male plugs

Enfain

Enfain 90 degree DIN5P MIDI cable 1.5m

SKU CH-870W-TCZ7V

Right-angle 5-pin DIN cable carries MIDI or control signals between instruments, lighting rigs and stage equipment over 1.5 m

Cable Length 3m

  • 90 degree elbow keeps connectors clear in tight racks
  • 5 metre length suits stage and studio runs
  • DIN5P double male plugs connect MIDI gear directly
  • Black jacket resists wear on touring rigs
  • Carries control signals for fog machines and LED lighting

90° DIN5P MIDI cable for stage and studio

The Enfain 90 degree DIN5P MIDI cable carries standard 5-pin MIDI signals between instruments, controllers and interfaces. Its right-angle plug reduces strain on panel-mounted sockets in tight rack spaces. The 1.5 m length suits desktop synth setups and short rack runs. Musicians and AV installers get a straightforward male-to-male link without extra adapters.

Passive cable thermals and power

As a passive copper cable it generates no heat and draws no power during signal transmission. No active electronics means silent operation in noise-sensitive studios or broadcast booths. The moulded strain relief protects the solder joints from repeated bending. Normal use imposes no thermal load on connected equipment.

Right-angle plug eases tight installs

The 90° elbow lets the cable run parallel to the panel, saving depth behind rack doors or pedalboards. Double male DIN5P ends connect directly to standard MIDI in/out/thru ports without gender changers. Black PVC jacket resists scuffs on stage and in fixed installs. No software or drivers are required for any MIDI-compliant device.

Highlights

  • 90 degree elbow keeps connectors clear in tight racks
  • 5 metre length suits stage and studio runs
  • DIN5P double male plugs connect MIDI gear directly
  • Black jacket resists wear on touring rigs
  • Carries control signals for fog machines and LED lighting

Specifications

No published specifications for this item yet.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I fit the 90 degree DIN5P plug into a tight rack space?

Align the five pins with the socket, then push the elbow connector straight in until the metal shell seats fully; forcing it at an angle bends the pins.

What upkeep does the 1.5 m DIN5P cable need over time?

Inspect the strain relief at each end every few months; if the moulding cracks or the pins oxidise, replace the cable to keep signal integrity.

At what length does signal loss appear first on a 1.5 m DIN5P run?

The 1.5 m length stays within standard MIDI limits, so attenuation is negligible; the first practical limit is physical stress on the 90 degree elbow rather than electrical loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.