We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Enfain

Enfain 6.35mm TRS instrument cable 6.5m

SKU CH-89SK-SP4KZ

A 6.5 m 6.35 mm TRS cable carries balanced mono signals between guitars, keyboards, mixers and amplifiers

Cable Length 0.3 m

  • TRS balanced design rejects noise for clean signal
  • 5 m length gives stage-to-amp reach
  • 35 mm plugs fit guitars, keyboards and mixers
  • Three-core construction carries stereo or mono audio

6.35 mm TRS instrument cable for stage and studio

The Enfain 6.35 mm TRS cable carries a balanced mono signal between electric guitar, bass, keyboard, mixer, amplifier, speaker or equaliser. Its three-core construction with noise cancellation keeps interference low across the 6.5 metre run, making it suitable for live performance, rehearsal rooms and fixed installations.

Capacity and headroom: balanced mono over 6.5 metres

The cable handles standard instrument-level and line-level signals without audible degradation at the stated length. It is not designed for unbalanced TS connections, speaker-level power, digital audio protocols or runs longer than 6.5 metres where capacitance could roll off high frequencies.

Highlights

  • TRS balanced design rejects noise for clean signal
  • 5 m length gives stage-to-amp reach
  • 35 mm plugs fit guitars, keyboards and mixers
  • Three-core construction carries stereo or mono audio

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 6.35 mm TRS connectors on this 6.5 m cable fit the 1/4 inch jacks on my older mixer and amplifier?

Yes, the 6.35 mm TRS plugs are the standard 1/4 inch size used on professional audio gear, so they will seat correctly in the jacks on your existing mixer and amplifier.

How can I confirm the cable is passing a balanced stereo signal correctly after I connect it?

Plug the cable between a balanced output and a balanced input, then listen for a clean stereo image with no hum; the three-core design and TRS connectors should reject common-mode noise when both ends are balanced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.