Energizewiz
Energizewiz 280W 20V 14A AC Laptop Charger for HP Omen 16 ZBook Fury Studio 16
Delivers 280W at 20V 14A for HP Omen 16 and ZBook Fury 16 or Studio 16 models, with 100-240V input and 4.5x3.0mm DC connector
- ColorBlack
- TypeAC Adapter
- CompatibilityOmen 16 16t-k000 16-n0000 16Z-n0000 16-wd0000 16-wf0000
- AC Adapter Voltage20V
- AC Adapter Current14A
- AC Adapter Output Power280W
- Delivers 280W for demanding laptop performance
- Works worldwide with 100-240V AC input range
- Fits precisely with 4.5x3.0mm DC connector pin
- Compatible with HP Omen 16 and ZBook Fury Studio models
- Protects against short-circuit overvoltage overcurrent and overheating
Replacement 280W charger for HP workstations
This Energizewiz AC adapter delivers 280 watts at 20 volts and 14 amps, matching the original PA-280W specification for HP Omen 16 and ZBook Fury or Studio 16 models. It replaces part numbers including TPN-LA27, TPN-CA26 and A280A011P. The unit ships new with a detachable AC power cable included.
Worldwide input with safety protections
The adapter accepts 100 to 240 volts AC at 50 to 60 hertz, so it operates on mains supplies worldwide without a separate voltage converter. Built-in safeguards protect against short-circuit, overvoltage, overcurrent and internal overheating during normal operation. No fan is fitted, so the brick runs silently.
4.5 by 3.0 mm DC connector fit
The barrel plug measures 4.5 millimetres outer diameter by 3.0 millimetres inner diameter, the exact size required by the listed Omen 16 and ZBook 16 series laptops. If your machine uses a different pin size or a lower-wattage brick, this adapter will not connect or supply sufficient power.
Highlights
- Delivers 280W for demanding laptop performance
- Works worldwide with 100-240V AC input range
- Fits precisely with 4.5x3.0mm DC connector pin
- Compatible with HP Omen 16 and ZBook Fury Studio models
- Protects against short-circuit overvoltage overcurrent and overheating
Specifications
| Brand | For Hp |
|---|---|
| Model | PA-280W |
| Color | Black |
| Type | AC Adapter |
| Compatibility | Omen 16 16t-k000 16-n0000 16Z-n0000 16-wd0000 16-wf0000 |
| AC Adapter Voltage | 20V |
| AC Adapter Current | 14A |
| AC Adapter Output Power | 280W |
| Function | Notebook |
Questions about this item
How do I install the Energizewiz 280W charger and what is the step people get wrong?
Connect the AC cable to the brick, plug the DC tip firmly into the laptop until it clicks, then insert the mains plug into a 100-240V 50-60Hz outlet. The common mistake is not pushing the 4.5x3.0mm connector in fully, leaving the 20V 14A circuit unlatched.
What maintenance or replacement will the Energizewiz 280W charger need later?
Inspect the AC cable and DC cord for fraying every few months; keep the brick vents clear of dust so the internal overheating protection does not trip. Replace the unit if the 4.5x3.0mm pin loosens or the 280W output becomes unstable.
What limit shows up first on the Energizewiz 280W charger under sustained use?
The internal overheating protection activates first when the 280W load runs continuously in a hot environment, cutting output until the brick cools. The 20V 14A rating is sustained only while the thermal guard stays closed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



