We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray thermoplastic grease interceptor, rectangular box with gasket fittings, dynamic baffle and pedestrian cover

Endura

Endura 3910A02 Grease Interceptor 2 in 10 gpm 20 lb

SKU CH-HAR8-7JDC9

Thermoplastic grease interceptor with 10 gpm flow rate and 20 lb capacity for 2-inch pipe systems

  • MaterialHAWA
  • Weight19.2
  • Handles 10 gpm flow for efficient grease removal
  • 20 lb capacity reduces cleaning frequency
  • Dynamic baffle improves separation performance
  • Silicon odor seal minimises unpleasant smells
  • Pedestrian rated cover supports safe foot traffic

Endura 3910A02 Grease Interceptor

The Endura 3910A02 is a thermoplastic grease interceptor built for commercial kitchens and food-service operations. It handles a flow rate of 10 gpm and retains up to 20 lb of grease. The unit uses 2 in gasket connections for inlet and outlet piping. It is rated for pedestrian traffic and meets CSA standards.

Installation uses gasket connections on 2 in pipes

The interceptor connects via gasket-type inlet and outlet fittings sized for 2 in pipe. Its overall length and depth are 17 1/2 in with a width of 14 1/2 in. The dynamic baffle and silicon odor seal are integrated, so no extra components are needed for those functions. A flow control fitting is included in the box. The thermoplastic body weighs 19.2 lb, allowing manual placement without heavy lifting equipment.

10 gpm flow and 20 lb grease capacity

The unit processes 10 gallons per minute while storing up to 20 lb of grease before cleaning is required. Maximum operating temperature is 220 Degrees F. The gray unfinished plastic construction resists corrosion in typical grease-laden wastewater. It is not suited for higher flow rates or larger grease loads beyond the rated figures.

Highlights

  • Handles 10 gpm flow for efficient grease removal
  • 20 lb capacity reduces cleaning frequency
  • Dynamic baffle improves separation performance
  • Silicon odor seal minimises unpleasant smells
  • Pedestrian rated cover supports safe foot traffic

Specifications

MaterialHAWA
Weight19.2
BrandENDURA

Questions about this item

How do I verify the Endura 3910A02 grease interceptor is working correctly after installation?

After setup, confirm that wastewater flows through the 2-inch gasketed inlet and outlet at up to 10 gpm without backup, the dynamic baffle separates grease into the 20 lb capacity chamber, and the silicon odor seal prevents smells while the pedestrian-rated cover sits flush.

What comes with the Endura 3910A02 and what must be purchased separately?

The unit includes the thermoplastic body with dynamic baffle, silicon odor seal, pedestrian-rated access cover, and an integrated flow control fitting for the 2-inch gasket connections; piping, gaskets, and any required vent or cleanout fittings are not included.

Which capacity version of the Endura 3910A02 should I choose for my application?

This model is offered in a single 20 lb grease-holding capacity with a 10 gpm flow rating, 2-inch inlet and outlet, and 17 1/2 by 14 1/2 inch footprint; select it when local code requires that exact capacity and flow combination.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.