We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular relay 1.5 by 1 inches adhesive mount SPDT LED 24VDC 24VAC 115VAC UL

EDWARDS-SIGNALING

EDWARDS-SIGNALING PAM1 Relay 1.5 in 1 in Adhesive Tape Mount LED SPDT 24VDC 24VAC 115VAC UL

SKU CH-T596-AFPGJ

SPDT relay with LED indicator mounts via adhesive tape and operates on 24 VDC, 24 VAC or 115 VAC

  • TypeFacility & Worksite Safety
  • ColorTransparent
  • SPDT relay switches two circuits with one compact device
  • LED indicator shows status instantly for quick troubleshooting
  • Adhesive tape mount installs in seconds without drilling holes
  • Operates on 24VDC, 24VAC and 115VAC for flexible wiring
  • UL listed for verified safety compliance

Relay for Facility Safety

The Edwards Signaling PAM1 is a single-pole double-throw relay with an integrated LED indicator, designed for facility and worksite safety circuits. It mounts using adhesive tape and operates on 24 VDC, 24 VAC or 115 VAC supplies. The unit carries a UL listing.

Voltage Compatibility Check

The relay functions at three specific voltages: 24 VDC, 24 VAC and 115 VAC. Verify that your control circuit matches one of these exact ratings before installation. A mismatch will prevent correct operation.

Installers Needing Adhesive Mount

This model suits technicians who require a compact, tape-mounted relay for panel or enclosure fitting. It is not intended for DIN-rail or screw-terminal installations. Buyers needing higher contact counts or different coil voltages should consider alternative relay types.

Highlights

  • SPDT relay switches two circuits with one compact device
  • LED indicator shows status instantly for quick troubleshooting
  • Adhesive tape mount installs in seconds without drilling holes
  • Operates on 24VDC, 24VAC and 115VAC for flexible wiring
  • UL listed for verified safety compliance

Specifications

BrandEDWARDS SIGNALING
TypeFacility & Worksite Safety
ColorTransparent

Questions about this item

What does the 1.5 in height mean once the relay is mounted in a panel?

The 1.5 in height is the overall depth the relay occupies behind the mounting surface, so allow at least that much clearance inside the enclosure.

How do the 24VDC, 24VAC and 115VAC ratings limit the circuits I can switch?

The coil operates on any of those three voltages, and the SPDT contacts will switch loads within the relay's rated contact limits for the chosen supply.

What does the adhesive tape mount require for a secure fit?

A clean, flat surface at least 1 in by 1.5 in is needed for the factory-applied tape to bond reliably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.