We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

EDWARDS-SIGNALING

EDWARDS-SIGNALING 94PLEDMA120A Warning Light Amber 100W Halogen 120V AC 75 fpm

SKU CH-RKKM-1C1HR

Amber warning light with 100 W halogen lamp, 120 V AC power, 75 flashes per minute, 1800 lumen output, and NEMA 4X hazardous-location rating

  • Amber warning colour for clear hazard signalling
  • 100W halogen lamp delivers 1800 lumens output
  • 75 flashes per minute ensures high visibility
  • Cast steel housing with polycarbonate lens rated NEMA 4X
  • 120V AC power draws 1A for simple installation

Amber Warning Light for Hazardous Areas

The EDWARDS-SIGNALING 94PLEDMA120A is a warning light built for Division 2 hazardous locations and NEMA 4X environments. It serves industrial facilities where visible alerts are required in harsh conditions. The cast steel housing and polycarbonate dome lens resist corrosion and impact. It mounts on standard 3/4 inch NPT pipe for permanent installation.

100W Halogen Lamp at 120V AC

The single specification that decides fit is the 100 watt halogen lamp operating on 120 volt AC power drawing 1 amp. It produces 1800 lumens with a rated lamp life of 1000 hours and flashes at 75 flashes per minute. Buyers who need LED efficiency, a different voltage, or a steady-burn mode should look elsewhere.

Pipe-Mounted Fixture for 120V Systems

This fixture integrates directly into a 120 volt AC wired system through the 3/4 inch NPT pipe mount. The cast steel body frees up panel space by using existing pipe infrastructure. It requires a compatible conduit run and power supply rated for the 1 amp draw. The NEMA 4X rating allows placement in wash-down or outdoor areas without additional enclosures.

Highlights

  • Amber warning colour for clear hazard signalling
  • 100W halogen lamp delivers 1800 lumens output
  • 75 flashes per minute ensures high visibility
  • Cast steel housing with polycarbonate lens rated NEMA 4X
  • 120V AC power draws 1A for simple installation

Specifications

BrandEDWARDS SIGNALING

Questions about this item

What does the 1800 lumen rating mean when this warning light is installed in a real machine?

The 1800 lumen output provides a bright amber signal visible in industrial environments, produced by the 100W halogen lamp flashing 75 times per minute.

How does the 120V AC power interface cap what this fixture can do in practice?

Operating on 120V AC power with a 1A current draw, it connects via wired power source for continuous operation in fixed installations.

What does the 3/4 inch NPT pipe mounting need to fit this warning light securely?

The cast steel housing mounts directly to a 3/4 inch NPT pipe thread, with a polycarbonate dome lens and NEMA 4X rating for Division 2 hazardous locations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.