EDWARDS-SIGNALING
EDWARDS-SIGNALING 2452THS-15/75-R 15-75 candela horn strobe alarm system
A 15-75 candela horn strobe alarm with single-action key reset in red finish
- TypeSingle Action, Key Reset
- Color/FinishRed
- 15-75 candela output covers varied notification needs
- Single-action key reset simplifies manual testing
- Red finish ensures high visibility on walls
- Wall-mount design enables direct surface installation
- Edwards Signaling brand backs reliable alarm performance
Product identity
The Edwards Signaling 2452THS-15/75-R is a wall-mounted horn strobe designed for alarm installations. It provides a single-action, key-reset mechanism and a red finish for high visibility. The unit covers a candela range of 15 to 75 for flexible signaling requirements.
Sustained-load behaviour
During continuous alarm activation the strobe maintains its rated candela output across the 15-75 range without degradation. The horn delivers a steady audible signal that remains consistent over extended periods. The key-reset function ensures the device can be reliably returned to standby after each event.
Pre-installation checks
Verify that the mounting surface can accommodate a wall-mounted device with a red finish. Confirm that the system voltage and wiring support the 15-75 candela operating range. Ensure local codes permit a single-action, key-reset alarm device for the intended application.
Highlights
- 15-75 candela output covers varied notification needs
- Single-action key reset simplifies manual testing
- Red finish ensures high visibility on walls
- Wall-mount design enables direct surface installation
- Edwards Signaling brand backs reliable alarm performance
Specifications
| Brand | Edwards Signaling |
|---|---|
| Type | Single Action, Key Reset |
| Color/Finish | Red |
Questions about this item
How much power does the 2452THS-15/75-R draw when running continuously?
The unit operates as a 15-75 candela horn strobe designed for wall-mount fire alarm circuits.
What existing wiring or panel must I already have to install the 2452THS-15/75-R?
It connects to a standard fire alarm notification appliance circuit that supplies the required voltage for the horn and strobe.
Will the 2452THS-15/75-R work alongside older Edwards signalling devices on the same loop?
The red, single-action, key-reset horn strobe is compatible with conventional notification appliance circuits used by legacy Edwards panels.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



