ecoartheating ECOT02 HVAC Control 120/240V 15A -40 to 210°F ±0.1°F
Digital thermostat controls heating and cooling from -40 to 210 °F with ±0.1 °F accuracy, 15 A relay, cyclic timing and power memory
- TypeHeating / Cooling, Push Button
- Size/Dimensions1.55 in x 2.26 in x 4.15 in
- ColorWhite
- Voltage120/240
- Mount TypeWall Mount
- Relay Contact120
- Precise temperature control from -40 to 210 °F with ±0.1 °F accuracy
- 15 A relay handles up to 1800 W heaters at 120 V
- Backlit display stays readable in dark environments
- Power memory plus cyclic and countdown timer modes
- Compact wall-mount unit fits incubators, greenhouses and brewing setups
Plug-in thermostat for heating and cooling
The ecoartheating ECOT02 is a wall-mount digital thermostat that plugs into a 120 V or 240 V outlet and switches loads up to 15 A. It suits incubators, reptile rooms, greenhouses and home-brewing setups where a single heater or chiller must be held to a precise set-point.
Sustained 1800 W relay operation
The 15 A relay is rated for continuous 1800 W heater loads at 120 V, so the unit maintains its switching integrity during long heating cycles without contact degradation. Power-memory retains the last mode after an outage, and the cyclic timer can run repeated on-off sequences day after day without drift.
120 V contact limit on a dual-voltage housing
Although the controller accepts 120 V or 240 V supply, the relay contact itself is specified at 120 V, so 240 V loads must be switched through an external contactor. The -40 °F to 210 °F range with 0.1 °F resolution is only valid within the unit’s own operating envelope; sensors or wiring outside that envelope are not covered.
Highlights
- Precise temperature control from -40 to 210 °F with ±0.1 °F accuracy
- 15 A relay handles up to 1800 W heaters at 120 V
- Backlit display stays readable in dark environments
- Power memory plus cyclic and countdown timer modes
- Compact wall-mount unit fits incubators, greenhouses and brewing setups
Specifications
| Type | Heating / Cooling, Push Button |
|---|---|
| Brand | ecoartheating |
| Model | ECOT02 |
| Size/Dimensions | 1.55 in x 2.26 in x 4.15 in |
| Color | White |
| Voltage | 120/240 |
| Mount Type | Wall Mount |
| Relay Contact | 120 |
| Features | Infrared Heater, reptile rooms, greenhouses, home brewing, cyclic timing; ountdown on; countdown off; countdown on; off mode, power memory; temperature calibration, brewing, ecoartheating |
Questions about this item
How much power does the ECOT02 draw when it runs a 1800 W heater continuously?
The controller itself consumes minimal standby power; the 15 A relay passes up to 1800 W to the heater, so total draw equals the heater load plus a few watts for the display and logic.
What voltage supply and plug type must I already have for the ECOT02 to operate?
The unit requires a 120 V or 240 V mains socket and fits a standard North American wall outlet; the load plugs into the built-in receptacle on the controller.
Will the ECOT02 still control temperature accurately if I keep my older 110 V incubator heater?
Yes, the relay is rated for 120 V operation and the ±0.1 °F precision applies across the full -40 to 210 °F range, so legacy 110 V heaters work without calibration changes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
