Eclipse
Eclipse 300-107 22 1/2 in Indent Crimper 8 AWG to 250 MCM
An indent-style crimper for battery lugs and compression lugs from 8 AWG to 250 kcmil with a 22 3/8 in tool length
- Solid steel construction withstands heavy daily use
- 22 1/2 inch length gives strong leverage on large lugs
- Handles 8 AWG to 250 MCM for wide cable range
- Manual indent action ensures reliable crimps on battery lugs
- Works with insulated and uninsulated compression terminals
Indent crimper for battery and compression lugs
The Eclipse 300-107 is a manual indent-style crimping tool built from solid steel. It accepts insulated and uninsulated terminals on wire sizes from 8 AWG up to 250 kcmil. The 22 3/8 in length provides leverage for heavy-gauge connections. No wire cutter or stripper is integrated.
Suited for panel work and large cable terminations
Electricians and maintenance technicians terminating battery lugs or compression lugs in the 8 AWG to 250 kcmil range will find the capacity matches common panel and service cables. Users who need a built-in cutter, stripper, or ratchet mechanism should look at a different tool. The manual adjustability also means each crimp relies on operator force.
Wire-range capacity defines the fit
The single specification that decides suitability is the compatible wire span of 8 AWG to 250 kcmil. If the conductors fall outside this range the tool cannot produce a reliable crimp. Verify the exact lug and wire combination before purchasing.
Highlights
- Solid steel construction withstands heavy daily use
- 22 1/2 inch length gives strong leverage on large lugs
- Handles 8 AWG to 250 MCM for wide cable range
- Manual indent action ensures reliable crimps on battery lugs
- Works with insulated and uninsulated compression terminals
Specifications
| Brand | Eclipse |
|---|---|
| Model | 300-107 |
Questions about this item
Does the 300-107 crimper need a separate hydraulic pump or power source to operate?
No, the 300-107 is a manual indent crimper that relies on hand force through its 22 3/8 in handles, so no external pump or electricity is required.
Will the 300-107 work with 4/0 AWG aluminum lugs I already have in stock?
Yes, the 300-107 lists 4/0 AWG among its approved aluminum lug sizes, so your existing lugs fall within the tool's 8 AWG to 250 kcmil range.
How can I confirm the 300-107 is producing a proper indent on a 250 kcmil compression lug?
After crimping, inspect the lug barrel for a clean, uniform indent mark centred on the conductor; the wire should not pull out and the lug should show no cracks or excessive flash.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
