We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular LED light bar, 9 by 2 by 2.1 inches, permanent mount, IP67 rated

Ecco

Ecco EW3109 Utility Light Bar traffic safety equipment

SKU CH-ATXX-ASBB6

LED utility light bar draws 0.7 A at 12 to 24 V DC, measures 9 x 9 x 2.1 in, and meets IP67 with permanent hardwired mounting

  • LED light bar draws only 0.7 A at 12 to 24 V DC
  • IP67 rating protects against dust and water ingress
  • Compact 9 x 9 x 2.1 inch housing fits tight mounting spaces
  • Hardwired permanent mount ensures secure vehicle installation
  • Meets California Proposition 65 chemical disclosure requirements

Ecco EW3109 Utility Light Bar

The Ecco EW3109 is an LED utility light bar designed for permanent mounting on vehicles or facility equipment. It operates on 12 to 24V DC systems and draws 0.7A during use. The unit measures 9 x 2 x 2.1 inches and features a hardwired connection for fixed installation. It suits fleets and grounds crews needing a compact warning or work light.

IP67 Sealed Construction

The light bar carries an IP67 rating, indicating full protection against dust ingress and temporary water immersion. LED technology generates minimal heat compared with older lamp types, keeping the housing cool during normal operation. The sealed enclosure prevents moisture or debris from affecting the emitters or circuitry. No moving parts are present, so acoustic noise is effectively zero.

Sustained Duty Performance

Under continuous operation the low current draw of 0.7A places little strain on a 12 to 24V DC supply, allowing extended run times without voltage sag. The IP67 seal maintains its integrity over long shifts in wet or dusty environments. California Proposition 65 notices apply, so installers should handle the unit with appropriate precautions. The hardwired design ensures a secure electrical path that will not loosen under vibration.

Highlights

  • LED light bar draws only 0.7 A at 12 to 24 V DC
  • IP67 rating protects against dust and water ingress
  • Compact 9 x 9 x 2.1 inch housing fits tight mounting spaces
  • Hardwired permanent mount ensures secure vehicle installation
  • Meets California Proposition 65 chemical disclosure requirements

Specifications

BrandECCO

Questions about this item

How do I permanently mount and hardwire the EW3109 light bar to a 12 to 24V DC system?

Mount the bar permanently using its built-in hardware, then route the leads to a fused 12 to 24V DC supply; the unit draws 0.7A, so size the fuse and wire gauge for that continuous load and seal every connection to preserve the IP67 rating.

What maintenance will the sealed LED light bar need over time?

The IP67-rated housing is sealed against dust and water, so no internal service is required; periodically clean the lens with mild soap and water, inspect the cable entry and mounting bolts for corrosion, and re-torque or re-seal if any moisture appears.

At what point does heat become the limiting factor during continuous operation?

The LEDs and driver are designed to run continuously at 0.7A within a 12 to 24V DC range inside the IP67 enclosure; sustained use at the upper voltage limit in high ambient temperature will reach thermal equilibrium first, so ensure airflow around the 2.1-inch high housing is not blocked.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.