We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular LED warning light with clear lens and blunt-cut wires

Ecco

Ecco ED3703C Perimeter Flashing Warning Light

SKU CH-05YM-5K4WZ

Rectangular LED perimeter light flashes white at 5.6 W, meets SAE J595 Class 1, and seals to IP67 for 12–24 V DC vehicles

  • ColorClear
  • SAE J595 Class 1 rating meets high visibility standards
  • IP67 sealing protects against dust and water ingress
  • 12-24V DC range suits most RV electrical systems
  • LED technology delivers 5.6 W flashing output with low draw
  • Permanent mount with blunt-cut wires simplifies installation

Purpose-built RV safety light

The Ecco ED3703C is a perimeter flashing warning light designed for recreational vehicles that need high-visibility signalling. Its SAE J595 Class 1 rating confirms it meets a recognised standard for emergency and utility lighting. The unit operates on 12-24V DC systems common in RV electrical architectures.

Rugged sealed housing with blunt-cut leads

An IP67-rated enclosure protects the three LED heads against dust ingress and temporary immersion during travel or wash-down. The rectangular clear lens measures 3 11/16 in long by 1 3/8 in high and 5/8 in deep, fitting tight exterior cavities. Blunt-cut wires allow direct splicing into existing circuits without proprietary connectors.

Replaces aging incandescent perimeter lamps

Owners upgrading from older filament-based clearance or side-marker lights gain lower 5.6 W power draw and longer LED service life. The jump is worthwhile when the original lenses have yellowed, seals have leaked or the flash pattern no longer meets current visibility expectations. Universal vehicle compatibility simplifies the swap across multiple RV brands.

Highlights

  • SAE J595 Class 1 rating meets high visibility standards
  • IP67 sealing protects against dust and water ingress
  • 12-24V DC range suits most RV electrical systems
  • LED technology delivers 5.6 W flashing output with low draw
  • Permanent mount with blunt-cut wires simplifies installation

Specifications

BrandECCO
ColorClear

Questions about this item

What does the SAE J595 Class 1 rating cap in practice?

The SAE J595 Class 1 rating sets the minimum photometric performance for the flashing pattern, so the light meets the required intensity for perimeter warning use.

What are the exact dimensions needed to mount the ED3703C?

The light measures 3 11/16 inches long, 1 3/8 inches high and 5/8 inch deep, with a rectangular shape for flush mounting.

How is the ED3703C wired, and what step is often missed?

It uses blunt-cut wires for a permanent 12-24V DC connection; the step often missed is properly sealing the wire splices to maintain the IP67 rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.