We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular amber-clear LED mini lightbar, 11 in long, low-profile lens, blunt-cut wires visible

Ecco

Ecco 5550CA Mini Lightbar LED Amber/Clear 11 in RV Lighting

SKU CH-VCRK-WXP6J

Compact LED mini lightbar delivers SAE J845 Class 1 flashing amber output from four heads in an IP65-rated housing measuring 10 7/8 inches long

  • ColorAmber/Clear
  • SAE J845 Class 1 rating meets high-visibility warning standards
  • IP65 ingress protection withstands dust and water jets
  • 8 W LED array delivers bright flashing output with low power draw
  • 12-24 V DC operation suits a wide range of vehicle electrical systems
  • Compact 10 7/8 in rectangular bar fits tight mounting spaces

Compact warning light for universal vehicle use

The Ecco 5550CA mini lightbar measures 11 inches long and mounts permanently on any compatible vehicle. It operates on 12 to 24 volt DC power and draws 43.8 watts through blunt-cut wire leads. The unit carries SAE J845 Class 1 certification for high-visibility warning applications.

Steady output under continuous flashing cycles

LED technology maintains consistent amber and clear intensity during extended flashing patterns without thermal fade. The IP65-rated housing protects internal electronics from dust ingress and low-pressure water jets encountered in daily outdoor operation. Four heads distribute light across a rectangular pattern for broad coverage.

Rugged construction for permanent installation

The rectangular housing stands 2 3/16 inches tall and extends 7 5/8 inches deep to resist vibration and road shock. Blunt-cut wires require direct splicing into the vehicle electrical system rather than a plug-in connector. Builders needing a magnetic-mount or suction-cup option will need a different mounting style.

Highlights

  • SAE J845 Class 1 rating meets high-visibility warning standards
  • IP65 ingress protection withstands dust and water jets
  • 8 W LED array delivers bright flashing output with low power draw
  • 12-24 V DC operation suits a wide range of vehicle electrical systems
  • Compact 10 7/8 in rectangular bar fits tight mounting spaces

Specifications

BrandECCO
ColorAmber/Clear

Questions about this item

How much heat and power draw should I expect from the 43.8 W LEDs when the lightbar runs continuously?

The unit draws 43.8 W at 12–24 V DC, so sustained operation produces modest heat that the IP65-rated aluminium housing dissipates without active cooling.

Which wiring and voltage source must I already have to install the blunt-cut wires permanently?

You need a 12–24 V DC supply and a switched circuit with a fuse; the blunt-cut leads are stripped for direct crimp or solder connection.

Will the SAE J845 Class 1 flash pattern interfere with older incandescent marker lights on the same 12 V circuit?

The LED heads draw far less current than incandescent lamps, so they share a 12 V circuit without overloading it, and the Class 1 flash timing is independent of other lights.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.