Ebm-Papst
Ebm-Papst W2E250-HL06-01 M2E068-CF AC 230V 127W 280X80MM industrial cooling fan
A German-made axial fan with a 250 mm die-cast aluminium housing and seven painted steel blades moves up to 1865 m³/h at 230 V AC
- Reliable long-life operation backed by ball bearing motor
- Consistent airflow of 1865 m³/h at 2550–2700 RPM
- Safe performance across -25 °C to 60 °C ambient range
- Durable construction with die-cast aluminium housing and painted steel blades
- CE approved with IP44 protection and Class F insulation
Industrial AC axial fan for equipment cooling
The Ebm-Papst W2E250-HL06-01 is a 230 VAC metal axial fan built for industrial environments. It delivers up to 1865 m³/h airflow at 2550–2700 rpm with a power draw of 127–180 W. Ball bearings and IP44 protection suit continuous duty in HVAC cabinets, machinery enclosures and ventilation systems.
Suits integrators needing a 250 mm frame
This unit fits designs that specify a 280×80 mm mounting footprint, 2.8 kg weight and a 400 VDB capacitor. It is not for low-voltage DC circuits, variable-speed EC controls or installations requiring a higher IP rating than IP44. Buyers who need a different voltage, smaller diameter or quieter residential profile should look at alternative ranges.
Verify voltage, frequency
Confirm the supply is 230 VAC at 50/60 Hz and that the 0.88 A starting current is compatible with your protection devices. Check the 250 mm blade diameter and 68 mm motor depth against your enclosure clearances. Ensure the operating range of –25 °C to 60 °C matches the ambient conditions at the installation site.
Highlights
- Reliable long-life operation backed by ball bearing motor
- Consistent airflow of 1865 m³/h at 2550–2700 RPM
- Safe performance across -25 °C to 60 °C ambient range
- Durable construction with die-cast aluminium housing and painted steel blades
- CE approved with IP44 protection and Class F insulation
Specifications
No published specifications for this item yet.
Questions about this item
Does the fan need a run capacitor to operate on a 230 VAC supply?
Yes, the motor is rated for a 400 VDB capacitor; a suitable run capacitor must be provided by the installer.
Will the 250 mm frame and IP44 rating fit the existing cut-out on my legacy HVAC enclosure?
The housing is die-cast aluminium, 250 mm in diameter and 80 mm deep with IP44 protection; verify the cut-out dimensions before mounting.
How can I confirm the unit is running at its rated speed after wiring it up?
Measure the rotational speed with a tachometer; it should read between 2550 and 2700 min⁻¹ under nominal 230 VAC, 50/60 Hz conditions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
