Ebm-Papst
Ebm-Papst No.R4E310-AP11-01/F01 230V 115W industrial cooling fan
230 V backward centrifugal fan with ball-bearing motor, IP44 protection and 115 W power draw
- TypeCentrifugal fan
- Reliable operation across wide temperature range backed by -25 to 65 °C rating
- Consistent airflow from backward centrifugal design with 310 mm impeller
- Low maintenance thanks to ball bearing motor construction
- Safe installation in damp environments with IP44 protection rating
- Efficient 230 VAC performance drawing 115 W at 50 Hz
Industrial centrifugal fan
The Ebm-Papst R4E310-AP11-01/F01 is a backward centrifugal fan built for industrial HVAC and machinery cooling. It runs on 230 VAC at 50/60 Hz and draws up to 0.7 A at 160 W. The IP44 rating and Class F insulation suit dirty or damp plant environments. Buyers who need an axial airflow pattern or a DC supply voltage cannot use this unit.
Straightforward mounting with wiring care
The fan ships as a single 310 mm sheet-aluminium impeller on a ball-bearing M4E074-DF motor weighing 3.8 kg. Four corner holes accept standard M6 bolts, so mechanical fitting takes minutes with basic hand tools. The only common error is reversing live and neutral on the 230 VAC supply, which stalls the motor and trips the breaker. Installers must also verify the duct flange matches the 310 mm outlet before tightening.
230 VAC nominal voltage decides fit
This model only operates on 230 VAC mains; it will not start on 115 V or any DC source. Confirm the site supply matches 230 V at 50/60 Hz before ordering. If your system requires a different voltage, this fan is not the correct part.
Highlights
- Reliable operation across wide temperature range backed by -25 to 65 °C rating
- Consistent airflow from backward centrifugal design with 310 mm impeller
- Low maintenance thanks to ball bearing motor construction
- Safe installation in damp environments with IP44 protection rating
- Efficient 230 VAC performance drawing 115 W at 50 Hz
Specifications
| Brand | Ebmpapst |
|---|---|
| Model | R4E310-AP11-01/F01 |
| Type | Centrifugal fan |
Questions about this item
How can I verify the R4E310-AP11-01/F01 is running correctly after installation?
Measure the current draw at the 230VAC supply; it should read approximately 0.52A at 50Hz or 0.7A at 60Hz while the impeller spins at the corresponding 1390 or 1580 RPM.
What does the package contain and what extra items are required?
The box includes the fan unit only; you must supply a 230VAC 50/60Hz power source, mounting hardware and any ducting or guards needed for the IP44-rated enclosure.
Which voltage and frequency version of this centrifugal fan should I select?
The single model operates on 230VAC at both 50Hz and 60Hz, automatically delivering 115W at 1390 RPM or 160W at 1580 RPM respectively.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
