Ebm-Papst
Ebm-Papst No.D4E225-CC01-02 industrial cooling fan 230 V AC 2215 m³/h
Delivers 2215 m³/h airflow at 1150 RPM from a 225 mm forward-curved centrifugal impeller on 230 V AC
- High airflow of 2215 m³/h for demanding industrial cooling
- 230 V AC supply suits standard mains installations
- Forward-curved dual-inlet design moves large air volumes efficiently
- Ball-bearing motor rated for 1150 RPM continuous operation
- IP22 protection and Class B insulation handle -25 °C to 30 °C ambients
Industrial Centrifugal Blower 2215 m³/h
The Ebm-Papst D4E225-CC01-02 is a forward-curved centrifugal fan built for air shower and FFU purification systems. It delivers 2215 m³/h airflow at 1150 rpm using a 225 mm galvanised steel impeller. The unit weighs 12 kg and measures 370x327x341 mm, designed for industrial ventilation installations.
Check Voltage Phase and Duct Connection
Verify that your supply is single-phase 230 V AC at 50 Hz before wiring. The motor draws 2.84 A running current with a 4.5 A starting peak and requires a 400 VDB S2 capacitor. Ensure the IP22 rating suits the installation environment and that ductwork matches the dual-inlet housing dimensions.
Ball Bearing Motor 650 W Thermal Profile
The M4E074-LA motor uses ball bearings and Class B insulation rated for ambient temperatures from -25 °C to 30 °C. Power consumption is 650 W at full speed. CCC and EAC approvals are declared. Noise level varies with duct static pressure and mounting rigidity.
Highlights
- High airflow of 2215 m³/h for demanding industrial cooling
- 230 V AC supply suits standard mains installations
- Forward-curved dual-inlet design moves large air volumes efficiently
- Ball-bearing motor rated for 1150 RPM continuous operation
- IP22 protection and Class B insulation handle -25 °C to 30 °C ambients
Specifications
No published specifications for this item yet.
Questions about this item
Does the package include only the fan or are mounting brackets and a capacitor supplied as well?
The package contains one fan unit only; mounting brackets and a running capacitor are not included and must be sourced separately.
How do I confirm this specific model matches the airflow and voltage I need for my air-shower or FFU system?
Check that your design calls for 2215 m³/h at 230 V AC, 50 Hz, with a 225 mm forward-curved impeller and IP22 protection — those are the fixed specifications of this model.
What does the 650 W power rating mean for my electrical installation?
The fan draws 2.84 A running current and up to 4.5 A at start-up on a 230 V AC supply, so wiring, fusing and the capacitor must be rated for those values.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
