Ebm-Papst
Ebm-Papst K2S165-AA17-05/SK3241.100 230V AC 40-45W 165mm 2650/2700 RPM industrial cooling fan
A 165 mm axial fan moves air through Rittal cabinets at 2650 or 2700 rpm from a 230 V AC supply
- Runs on standard 230 VAC mains supply without extra hardware
- Ball bearing motor supports continuous duty in industrial cabinets
- Seven-blade impeller moves air at 2650/2700 RPM for strong flow
- CE-marked and IP20 rated for safe panel-mount installation
- Operates reliably from -30 °C to 55 °C ambient range
Rittal Cabinet Fan 165 mm 230 V AC
This axial fan is built for Rittal cabinet installations and similar industrial enclosures that require forced-air cooling. It operates on 230 V AC at 50/60 Hz and carries CE approval for use in compliant equipment.
Sustained Operation With Ball Bearing Motor
The ball-bearing motor runs continuously at 2650/2700 min⁻¹ drawing 40–45 W and 0.24/0.26 A. Insulation class F and an ambient range of –30 to 55 °C support long-duration duty without thermal derating.
Verify Mounting Clearance And IP Rating
The 165 mm blade diameter and 1.3 kg weight determine the cut-out and structural support needed. IP20 protection means the fan is not suited for wet or dusty environments without additional guarding.
Highlights
- Runs on standard 230 VAC mains supply without extra hardware
- Ball bearing motor supports continuous duty in industrial cabinets
- Seven-blade impeller moves air at 2650/2700 RPM for strong flow
- CE-marked and IP20 rated for safe panel-mount installation
- Operates reliably from -30 °C to 55 °C ambient range
Specifications
No published specifications for this item yet.
Questions about this item
How much power and current does the K2S165-AA17-05 draw when running continuously at 230 V AC?
The fan consumes 40 to 45 W and draws 0.24 A at 50 Hz or 0.26 A at 60 Hz. Its Class F insulation and ball-bearing motor are rated for continuous operation up to 55 °C ambient.
What mounting provisions and electrical connection does the 165 mm Rittal cabinet fan require?
It fits the standard Rittal 165 mm cut-out and terminates in flying leads for direct 230 V AC wiring; no separate driver or controller is needed.
Will the IP20-rated housing and 7-blade PA impeller interfere with adjacent components in a legacy rack?
The 165 mm diameter, 1.3 kg weight and IP20 rating match the original Rittal footprint, so it slots into existing cabinets without clearance changes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
