Ebm-Papst
Ebm-Papst K2E220-AB06-09 230 VAC AC centrifugal fan 220 mm 11 blades IP44
230 VAC centrifugal fan with 220 mm impeller, 11 blades, IP44 rating and ball bearing for continuous operation
- Bearing TypeBall Bearing
- 230 VAC single-phase operation suits standard mains supply
- 2550 min⁻¹ at 50 Hz delivers strong airflow
- Ball bearing motor ensures long service life
- IP44 protection resists dust and splashing water
- PA6.6 fibreglass-reinforced housing withstands 55 °C ambient
Ebm-Papst K2E220-AB06-09 AC centrifugal fan
This Ebm-Papst K2E220-AB06-09 is a 230 VAC single-phase centrifugal fan built for industrial cooling tasks. It suits maintenance engineers and HVAC specialists who need a direct replacement for the Siemens 6SY7000-0AB30 unit.
Ball-bearing motor with IP44 protection
The motor uses a ball bearing and includes a thermal overload protector wired internally. A fibreglass-reinforced PA6.6 housing and coated black rotor meet IP44 ingress protection when installed per EN 60034-5, while condensate discharge holes on the rotor side manage moisture in shaft-horizontal or rotor-on-bottom mounting.
2550 min⁻¹ at 50 Hz with 2.5 µF capacitor
At 50 Hz the fan draws 0.45 A, consumes 100 W and reaches 2550 min⁻¹ using a 2.5 µF / 400 V starting capacitor; at 60 Hz speed rises to 2700 min⁻¹ with 137 W input. Buyers needing a different voltage, frequency or airflow curve must select another model.
Highlights
- 230 VAC single-phase operation suits standard mains supply
- 2550 min⁻¹ at 50 Hz delivers strong airflow
- Ball bearing motor ensures long service life
- IP44 protection resists dust and splashing water
- PA6.6 fibreglass-reinforced housing withstands 55 °C ambient
Specifications
| Brand | Ebmpapst |
|---|---|
| Model | K2E220-AB06-09 |
| Bearing Type | Ball Bearing |
Questions about this item
What does the IP44 rating mean for dust and water ingress on this 220 mm centrifugal fan?
IP44 indicates protection against solid objects larger than 1 mm and splashing water from any direction, provided the fan is mounted as specified in EN 60034-5.
What mounting orientations are approved for the K2E220-AB06-09 fan housing?
The housing is designed for shaft horizontal or rotor on bottom; rotor on top is available only on request.
How is the required 2.5 µF starting capacitor connected during installation?
The 2.5 µF / 400 V capacitor must be wired in series with the auxiliary winding; incorrect polarity or omitting it will prevent the motor from starting.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
