Ebm-Papst
Ebm-Papst G3G250-MW50-01 400VAC EC Centrifugal Fan 250mm
A 250 mm backward-curved single-inlet EC centrifugal fan running at 6100 min⁻¹ with 2400 W motor for gas-condensing heating systems
- High airflow from 250 mm backward-curved impeller
- EC motor delivers 2400 W at 6100 min⁻¹
- CE approved for gas-condensing heating systems
- Operates reliably from −25 °C to +50 °C
- 400 VAC three-phase supply with 4.0 A current draw
Industrial EC Centrifugal Fan
The Ebm-Papst G3G250-MW50-01 is a 250 mm backward-curved single-inlet blower built for gas-condensing heating systems. It suits installers and OEMs who need a CE-approved EC motor running directly from a 400 VAC three-phase supply. Buyers who require a different voltage or a dual-inlet configuration cannot use this unit.
Thermals Noise and Power
The EC motor M3G112-EA draws 4.0 A at 2400 W while spinning at 6100 min-1 across 50/60 Hz. Ambient operating range spans -25 °C to +50 °C, so the fan maintains rated output in cold plant rooms and warm boiler enclosures alike. Ball bearings support continuous duty without scheduled lubrication.
Included Scope
The package contains the fan assembly only; no mounting brackets, wiring harnesses or control modules are supplied. Integrators must provide their own inlet ducting, vibration isolation and speed-control electronics compatible with the EC interface.
Highlights
- High airflow from 250 mm backward-curved impeller
- EC motor delivers 2400 W at 6100 min⁻¹
- CE approved for gas-condensing heating systems
- Operates reliably from −25 °C to +50 °C
- 400 VAC three-phase supply with 4.0 A current draw
Specifications
No published specifications for this item yet.
Questions about this item
How is the G3G250-MW50-01 mounted, and which step is often missed?
The 250 mm backward-curved single-inlet housing bolts to the duct flange; the step often missed is verifying the motor rotation arrow matches the required airflow direction before tightening.
What maintenance will the M3G112-EA motor and ball bearing need later?
Inspect the ball bearing for noise or play every 20 000 operating hours and clean the impeller blades to prevent imbalance; the sealed EC motor requires no lubrication.
At what ambient temperature does the 2400 W unit hit its thermal limit first under continuous load?
The rated ambient range tops out at +50 °C; sustained operation above this temperature triggers the motor's internal thermal protection and reduces speed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
