Ebm-Papst
Ebm-Papst DV4600-492 115V 19W 120x120x38mm industrial cooling fan
115 V AC compact fan moves air over struts at 2650 or 3100 rpm for 18 to 19 W
- 115 V AC input fits standard mains supply without a transformer
- 19 W maximum draw keeps energy costs low
- 3100 rpm top speed moves more air through tight cabinets
- 120 mm square frame matches common cut-out dimensions
- Class I protection provides basic insulation for safe operation
Compact 120 mm frame for cabinet cooling
The Ebm-Papst DV4600-492 is a 120 x 120 x 38 mm industrial fan built for compact enclosure ventilation. It runs on 115 V mains power and draws 18/19 W at 50/60 Hz. The unit suits engineers and integrators fitting forced-air cooling into tight cabinet spaces where a standard square footprint is required.
Verify mains voltage and mounting pattern
Confirm the installation site supplies 115 V AC at 50/60 Hz before ordering. The fan draws 0.2/0.24 A and carries protection class I, so a protective earth connection is mandatory. Check that the 120 mm square cut-out and screw centres match the existing panel, and ensure the clockwise rotation with intake over the struts matches the desired airflow path.
Fits standard 120 mm cut-outs, frees internal depth
The 38 mm depth slides into typical cabinet walls without protruding far into the equipment volume. Protection class I grounding ties into the chassis earth, satisfying safety requirements for metal enclosures. A single unit ships ready to mount, letting designers close the thermal loop on dense electronics without redesigning the panel layout.
Highlights
- 115 V AC input fits standard mains supply without a transformer
- 19 W maximum draw keeps energy costs low
- 3100 rpm top speed moves more air through tight cabinets
- 120 mm square frame matches common cut-out dimensions
- Class I protection provides basic insulation for safe operation
Specifications
No published specifications for this item yet.
Questions about this item
Does the DV4600-492 ship with mounting screws or a power cord, or must they be sourced separately?
Only the fan itself is included; mounting hardware and a mains lead are not supplied.
The spec lists two speeds — 2650 and 3100 rpm — how do I know which one my cabinet will run at?
Speed depends on mains frequency: 2650 rpm at 50 Hz and 3100 rpm at 60 Hz, so your local grid decides.
What does the 19 W power draw mean for a 115 V cabinet circuit?
At 115 V the fan draws 0.24 A, so it adds roughly 19 W to the cabinet's AC load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
