Ebm-Papst
Ebm-Papst A2S130-AB03-11 138.3 x 56.9mm 230 VAC 325m3/h 2800RPM Axial Cooling Fan
A 230 VAC axial fan with ball-bearing motor, IP44 protection and 325 m³/h airflow for industrial cooling
- 230 VAC operation suits mains-powered equipment
- 325 m³/h airflow moves heat efficiently
- 2800 RPM speed delivers strong cooling force
- IP44 rating protects against splashes and dust
- Ball bearing motor ensures long service life
Industrial axial fan for Lenze inverter systems
The Ebm-Papst A2S130-AB03-11 is a 230 VAC axial cooling fan built for industrial environments. It suits maintenance teams and OEM integrators who need a direct replacement for Lenze inverter cooling. The unit arrives new with CE approval and an IP44 rating.
325 m³/h airflow at 2800 RPM
The fan delivers 325 m³/h at 2800 RPM on 50 Hz supply, rising to 3250 RPM on 60 Hz. This single airflow figure determines whether the fan meets the inverter’s thermal design. Verify the required duty cycle against this rating before fitting.
39 W draw with ball-bearing motor
At 50 Hz the motor draws 39 W and 0.25 A; at 60 Hz it draws 50 W and 0.3 A. The ball bearing and insulation class B support continuous operation within the IP44 enclosure. The painted steel blades and 0.9 kg mass keep vibration low in normal service.
Highlights
- 230 VAC operation suits mains-powered equipment
- 325 m³/h airflow moves heat efficiently
- 2800 RPM speed delivers strong cooling force
- IP44 rating protects against splashes and dust
- Ball bearing motor ensures long service life
Specifications
No published specifications for this item yet.
Questions about this item
What does 325 m³/h airflow mean when the fan is installed in a Lenze inverter enclosure?
At 2800 RPM on 50 Hz the fan moves 325 cubic metres of air per hour, giving the inverter the rated cooling capacity specified by Lenze for that frame size.
How does the 230 VAC 50/60 Hz supply affect the fan’s speed and power ceiling?
On 50 Hz the motor runs at 2800 RPM drawing 39 W; on 60 Hz it rises to 3250 RPM and 50 W, so the supply frequency sets the practical performance limit.
What mounting clearance does the 138.3 × 56.9 mm frame with 130 mm blades require?
The housing measures 138.3 mm by 56.9 mm and the seven steel blades span 130 mm, so allow at least that footprint plus a few millimetres for the IP44 terminal box and wiring.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
