We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent IEC miniature magnetic contactor with screw terminals

Eaton

Eaton XTMC9A01A IEC Miniature Magnetic Contactor 1NC 120V AC 3P

SKU CH-CS0F-N5X8V

A non-reversing IEC miniature magnetic contactor rated 8.80 A with 120 V AC coil and 1NC auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Non-reversing action simplifies one-direction switching
  • 120V AC coil voltage powers the contactor
  • 80A maximum current rating handles load
  • 1NC auxiliary contact provides status feedback
  • IEC 60947 compliance meets global standards

Compact IEC Magnetic Contactor

The Eaton XTMC9A01A is a non-reversing, full-voltage contactor built to IEC 60947 for industrial and commercial control panels. It switches three-phase loads up to 8.80 A using a 120 V AC coil and provides one normally closed auxiliary contact for status signalling. Screw terminals give a secure field wiring method and the open-frame design suits tight enclosure layouts.

Upgrade from lower-rated or non-certified contactors

Replace older miniature contactors that lack UL Listing, CSA certification or the CE mark when your project demands documented compliance. The jump is worth it when a machine builder or panel shop requires IEC 60947 / EN 60947 conformity and a verified 8.80 A rating for motor-starting duty.

Verify coil voltage and auxiliary logic before

Confirm the control circuit supplies 120 V AC; other coil voltages will not operate this unit. Check that your control scheme needs a single normally closed auxiliary contact rather than normally open or changeover types. Ensure the DIN-rail mounting footprint and screw-terminal spacing match the available panel space and wiring plan.

Highlights

  • Non-reversing action simplifies one-direction switching
  • 120V AC coil voltage powers the contactor
  • 80A maximum current rating handles load
  • 1NC auxiliary contact provides status feedback
  • IEC 60947 compliance meets global standards

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

What screw-terminal spacing and wire gauge does the 120V AC coil require for mounting?

The contactor uses screw terminals for electrical connection; follow IEC 60947 terminal markings and torque specs for the 120V AC coil circuit.

Which step is most often missed when wiring the 1NC auxiliary contact on this IEC contactor?

Installers often forget to connect the single normally-closed auxiliary contact in the control circuit after mounting the main power leads.

When should the 8.80A-rated contact tips be inspected or replaced under normal industrial duty?

Inspect contact tips at intervals aligned with IEC 60947 maintenance schedules; replace if erosion or pitting exceeds the standard’s limits for 8.80A service.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.