We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver toggle switch with bat actuator and screw terminals

Eaton

Eaton XTD4B2A Toggle Switch DPDT 6 Connections On/Off/On 1 1/2 hp 10A

SKU CH-H2S3-ZJNAZ

A DPDT toggle switch with six connections provides On/Off/On control for circuits up to 10 A at 277 V AC and 1 1/2 hp

  • TypeIndustrial Electrical Controls & Automation
  • DPDT six-connection switching for versatile control
  • On/Off/On function enables three-position operation
  • 10 A at 277 V AC rating supports industrial loads
  • 1-1/2 hp motor rating handles demanding applications
  • UL listed and RoHS compliant for safety assurance

Industrial Toggle Switch

The Eaton XTD4B2A is a DPDT toggle switch rated for 10 A at 277 V AC and 1 1/2 hp motor loads. It provides six screw-terminal connections in an On/Off/On configuration for controlling two independent circuits from a single actuator. The 0.50 in mounting hole and included panel-mounting hardware suit industrial control panels and equipment builds.

Capacity and Headroom

The switch carries 15 A at 28 V DC and 20 A at 125 V AC, giving headroom for low-voltage DC motors or higher-current AC lighting circuits. At 277 V AC the 10 A rating becomes the limiting factor, so loads above that voltage or current require a different device. The 1 1/2 hp rating covers small single-phase motors in automation or HVAC applications.

Build Integration

A 0.500 in stem diameter with 0.47 in stem length and 0.64 in actuator length fits standard panel cut-outs without adapters. Screw terminals accept ring or fork lugs for secure wiring in vibration-prone environments. UL listing and RoHS compliance simplify regulatory approval for the finished assembly, while the silver actuator and stem maintain visibility in low-light cabinets.

Highlights

  • DPDT six-connection switching for versatile control
  • On/Off/On function enables three-position operation
  • 10 A at 277 V AC rating supports industrial loads
  • 1-1/2 hp motor rating handles demanding applications
  • UL listed and RoHS compliant for safety assurance

Specifications

BrandEATON
TypeIndustrial Electrical Controls & Automation

Questions about this item

Will this DPDT switch fit the 0.50 in mounting holes in my existing panel?

Yes, the stem diameter is 0.500 in and the mounting hole required is 0.50 in dia, so it matches standard half-inch cut-outs.

How can I verify the switch is toggling correctly once wired?

With power off, use a multimeter on the six screw terminals; each actuator position should show continuity only between the correct common and throw contacts per the On/Off/On function.

Does the box include mounting hardware or must I buy a panel nut separately?

The listing states "Includes Panel Mounting", so the necessary mounting hardware is supplied; no separate panel nut purchase is required.

More in Electrical Boxes

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.