We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular IEC magnetic contactor with screw terminals and DIN rail mounting, 6.5 in wide

Eaton

Eaton XTCR065D11A IEC Magnetic Contactor 3 Poles 120V AC 65 A Reversing

SKU CH-MKXF-A3MVM

Three-pole IEC reversing contactor rated 65 A inductive with 120 V AC coil and screw-terminal DIN-rail mounting

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC reversing contactor handles 65 A inductive loads
  • 110/120 V AC coil suits common control circuits
  • Screw terminals on DIN rail or panel mount
  • Two auxiliary contacts rated 1NO/1NC included
  • Compact 6 in × 6.5 in frame fits tight panels

Eaton XTCR065D11A Reversing Contactor

The Eaton XTCR065D11A is a three-pole IEC magnetic contactor rated for 65 A inductive and 98 A resistive loads. It operates on a 110/120V AC coil and includes two auxiliary contacts configured as 1NO/1NC. The unit mounts on DIN rail or panel and uses screw terminals for wiring connections.

For motor control panels needing forward

This contactor suits installations that require integrated reversing capability in a frame size D footprint. It is not suited for applications demanding a higher current rating than 65 A inductive or a different coil voltage than 110/120V AC. Buyers needing a non-reversing device or a different pole configuration should look elsewhere.

Reversing capability with 65 A inductive rating

The defining specification is the built-in reversing function combined with a 65 A inductive full-load current rating at 110/120V AC coil voltage. This single factor determines whether the contactor matches the motor starter design requirements. Verify the frame size D dimensions against the available panel space before ordering.

Highlights

  • IEC reversing contactor handles 65 A inductive loads
  • 110/120 V AC coil suits common control circuits
  • Screw terminals on DIN rail or panel mount
  • Two auxiliary contacts rated 1NO/1NC included
  • Compact 6 in × 6.5 in frame fits tight panels

Specifications

BrandEaton
ModelXTCR065D11A
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Will this 65 A reversing contactor fit on the same DIN rail as my older IEC starters?

Yes, it mounts on standard DIN rail or panel, and its frame size D measures 6 in high by 6.5 in wide, so it aligns with common IEC footprints.

How can I verify the 110/120 V AC coil is energised correctly after wiring?

Apply control voltage and listen for the mechanical click; the built-in 1NO/1NC auxiliary contacts will change state, giving a clear electrical indication.

Does the box include the screw-terminal lugs for the 65 A inductive load cables, or must I order them separately?

The contactor ships with integrated screw terminals ready for cable connection; no separate lugs are required for the 65 A inductive or 98 A resistive ratings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.