We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Transparent rectangular industrial contactor with screw terminals and DIN rail mounting slots

Eaton

Eaton XTCR025C21A IEC Magnetic Contactor 120V AC Reversing

SKU CH-N8Z1-YQ1N7

Reversing IEC magnetic contactor with 120V AC coil, 25A inductive and 45A resistive ratings, 1NC/2NO auxiliary contacts, IP20 protection, and embedded surge suppressor

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reversing action changes motor direction with 120V AC coil
  • Handles 25A inductive and 45A resistive loads for industrial use
  • Auxiliary contacts 1NC/2NO add switching flexibility
  • DIN rail or panel mount fits varied installations
  • Embedded surge suppressor protects against voltage spikes

Industrial reversing contactor

The Eaton XTCR025C21A is a full-voltage IEC magnetic contactor designed for reversing motor direction in industrial control panels. It operates on a 120V AC coil at 50 or 60 Hz and carries inductive loads up to 25 A and resistive loads up to 45 A. The unit suits single-phase motors up to 2 hp at 120 V and three-phase motors up to 20 hp at 600 V. It is built for automation systems that need reliable forward and reverse switching.

Thermals noise and power draw

The contactor functions across a temperature range of -13 °F to +122 °F without active cooling, so it adds no fan noise to the enclosure. Coil power consumption is limited to the 120 V AC control circuit, and the embedded surge suppressor dampens voltage spikes during switching. The IP20 rating means the device is protected against solid objects larger than 12 mm but offers no water ingress protection, so it must sit inside a suitable cabinet.

Build quality and connections

A transparent housing lets installers visually inspect contact status, while screw terminals accept wire leads for secure power and control connections. The frame size C body mounts on standard DIN rail or directly onto a panel, giving flexibility for panel layout. Four auxiliary contacts in a 1NC/2NO arrangement provide extra signalling or interlocking circuits for the control system.

Highlights

  • Reversing action changes motor direction with 120V AC coil
  • Handles 25A inductive and 45A resistive loads for industrial use
  • Auxiliary contacts 1NC/2NO add switching flexibility
  • DIN rail or panel mount fits varied installations
  • Embedded surge suppressor protects against voltage spikes

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How is the XTCR025C21A contactor mounted, and what step do installers often miss?

Mount it on a DIN rail or panel using screw terminals for wire attachment; the step often missed is verifying the coil voltage matches the 120V AC supply before energising the reversing circuit.

Which components will need replacement after extended operation?

The main power contacts rated for 25A inductive and 45A resistive loads, plus the four auxiliary contacts (1NC/2NO), wear over time and should be inspected periodically for pitting or overheating.

What is the first thermal limit reached during continuous duty?

The rated operating temperature ceiling of 122 Degrees F (approximately 50 Degrees C) is the primary limit; sustained operation above this degrades the embedded surge suppressor and contact integrity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.