We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact rectangular contactor in transparent housing with screw terminals and DIN rail mounting tabs

Eaton

Eaton XTCE018C01E IEC Magnetic Contactor 1NC 208V AC 3P Non-Reversing

SKU CH-2P8B-0A130

IEC magnetic contactor with 1NC auxiliary contact, 208V AC coil, 3 poles and non-reversing operation rated for 18 A inductive and 40 A resistive load

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • Reliable motor control with 18 A inductive rating
  • Handles resistive loads up to 40 A for versatile use
  • 208 V AC coil voltage suits standard industrial supplies
  • Three-pole design switches three-phase circuits efficiently
  • Compact 3.9 in height fits tight panel spaces

IEC magnetic contactor for motor control

The Eaton XTCE018C01E is a three-pole IEC magnetic contactor rated for 18 amps inductive and 40 amps resistive loads. It operates on a 208V AC coil and provides non-reversing switching for three-phase motors up to 5 hp at 240V AC. The unit mounts on DIN rail or panel and uses screw terminals for secure wiring connections. It suits industrial automation panels needing reliable motor starting.

Compact frame with no enclosure rating

Measuring 3.9 inches high and 1.85 inches wide, the frame size C housing carries no NEMA enclosure rating so it must be installed inside a suitable cabinet. The contactor draws power only through its 208V AC coil during normal operation while the main poles carry the load current. One normally closed auxiliary contact is included for status feedback or interlocking without extra modules.

DIN rail and panel mounting with screw terminals

The contactor supports both DIN rail and panel mounting styles giving flexibility for panel layout. Screw terminal connections accept standard ferrules or bare wire for the main and control circuits. No additional accessories or software are bundled; the product ships as the contactor unit only ready for integration into the control assembly.

Highlights

  • Reliable motor control with 18 A inductive rating
  • Handles resistive loads up to 40 A for versatile use
  • 208 V AC coil voltage suits standard industrial supplies
  • Three-pole design switches three-phase circuits efficiently
  • Compact 3.9 in height fits tight panel spaces

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How do I mount the XTCE018C01E on a DIN rail and what wiring step is often missed?

Snap the contactor onto a standard DIN rail or secure it with panel-mount screws; the step often missed is tightening each screw terminal to the correct torque so the 18 A inductive load stays secure.

Which part will need replacement first after extended switching cycles?

The main power contacts carrying up to 18 A inductive or 40 A resistive current wear first; the single 1NC auxiliary contact typically lasts longer.

What thermal limit appears first when the contactor runs continuously at full load?

The coil draws 208 V AC continuously and the frame size C enclosure has no forced cooling, so coil temperature rise is the first limit reached under sustained 18 A operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.