We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Eaton XTCE015B10C magnetic contactor, transparent housing, DIN rail mount, screw terminals

Eaton

Eaton XTCE015B10C IEC Magnetic Contactor 1NO 480V AC 3P Non-Reversing

SKU CH-N79X-P2YKF

IEC magnetic contactor with 1NO auxiliary contact, 3-pole non-reversing operation, 480V AC coil, and 15A inductive current rating

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated contactor for standard industrial motor control
  • 15 A inductive rating handles typical three-phase loads
  • 415/480 V AC coil matches common supply voltages
  • Three-pole non-reversing design for straightforward switching
  • DIN-rail and panel mounting fits existing enclosures

Industrial motor control

The Eaton XTCE015B10C is an IEC magnetic contactor designed for three-phase motor switching in industrial automation panels. It provides a 1NO auxiliary contact for status feedback and suits control circuits that require non-reversing operation at 480V AC.

Thermal and electrical behaviour

Rated for 15 A inductive and 22 A resistive full-load current, the contactor handles 5 hp at 240V AC three-phase without active cooling. The 415/480V AC coil draws power only while energised, and the screw-terminal connections run cool under normal duty cycles.

Panel integration

The frame size B body measures 2 in high by 3 in wide and mounts on DIN rail or directly on a panel. Screw terminals accept standard control wiring, freeing DIN-rail space for other modules and allowing the contactor to sit beside relays, timers or PLC I/O blocks in the same enclosure.

Highlights

  • IEC-rated contactor for standard industrial motor control
  • 15 A inductive rating handles typical three-phase loads
  • 415/480 V AC coil matches common supply voltages
  • Three-pole non-reversing design for straightforward switching
  • DIN-rail and panel mounting fits existing enclosures

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

How do I mount the XTCE015B10C contactor on a DIN rail and which step is often missed?

Clip the unit onto a standard DIN rail or secure it with panel-mount screws; the step often missed is tightening the screw terminals to the specified torque so the 15 A inductive circuit stays reliable.

What maintenance will the auxiliary contact and coil need over time?

Inspect the single 1NO auxiliary contact for wear and check the 415/480 V AC coil for overheating; replace the contactor if contact resistance rises or the coil hums continuously.

Which thermal limit appears first when the contactor runs at full load continuously?

The 15 A inductive full-load current rating is the limiting factor; sustained operation above this value causes the contacts to heat faster than the 22 A resistive rating would allow.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.