We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small transparent rectangular contactor with screw terminals and DIN rail clips

Eaton

Eaton XTCE012B10C IEC Magnetic Contactor 480V AC 3P Non-Reversing 1NO 12A

SKU CH-BWJY-PPD98

Controls three-phase motors up to 3 hp at 240 V with a 12 A inductive rating and 1NO auxiliary contact

  • TypeIndustrial Electrical Controls & Automation
  • ColorTransparent
  • IEC-rated contactor simplifies global panel compliance
  • 12 A inductive rating handles motor loads reliably
  • 480 V AC coil suits common industrial supplies
  • Screw terminals enable fast, secure wiring on DIN rail
  • 1 NO auxiliary contact provides ready status feedback

IEC Magnetic Contactor 12 A

The Eaton XTCE012B10C is a three-pole IEC magnetic contactor rated for 12 A inductive and 22 A resistive loads. It suits motor-starting and power-switching duties in industrial control panels and automation equipment.

415/480 V AC coil and screw terminals

The contactor operates from a 415/480 V AC coil and connects via screw terminals on a DIN-rail or panel mount. It carries no NEMA enclosure rating, so the installer must provide a suitable protective housing for the application environment.

3 hp at 240 V AC three-phase

With a 3 hp rating at 240 V AC three-phase, the unit handles small-to-medium motor loads comfortably. It is not intended for reversing circuits or for loads exceeding the 12 A inductive and 22 A resistive current limits.

Highlights

  • IEC-rated contactor simplifies global panel compliance
  • 12 A inductive rating handles motor loads reliably
  • 480 V AC coil suits common industrial supplies
  • Screw terminals enable fast, secure wiring on DIN rail
  • 1 NO auxiliary contact provides ready status feedback

Specifications

BrandEaton
TypeIndustrial Electrical Controls & Automation
ColorTransparent

Questions about this item

Should I pick the 12 A inductive or 22 A resistive rating for my load?

Choose 12 A inductive for motors, solenoids or transformers; choose 22 A resistive for heaters or incandescent lamps.

What does the 3 hp at 240 V AC mean once the contactor is wired in a panel?

It means the contactor can switch a 3 hp three-phase motor at 240 V AC within its 12 A inductive current limit.

How does the 415/480 V AC coil voltage cap what control voltage I can apply?

The coil is rated for 415 V AC or 480 V AC; apply only a control voltage within that range to operate the contactor reliably.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.